Rating of the best pedicure machines for 2022

Hardware pedicure is a modern replacement for the classical procedure, as well as a great opportunity to keep the appearance of the feet in good condition for a longer time. It perfectly combines a whole range of care procedures, thereby producing not only an aesthetic, but also a healing effect.

How to choose a pedicure machine

Previously, hardware pedicure was available only in salons under the guidance of a master.However, not everyone has the time, desire, and means to regularly visit a pedicure master. As a solution to this problem, manufacturers have offered the mass buyer semi-professional models that are more affordable and easier to manage. This made hardware pedicure available to a wider range of consumers and transferred it from the salon to home. Therefore, the choice of a device for a pedicure should, first of all, proceed from whether you are a professional master, or you want to do a pedicure for yourself and your loved ones without leaving your home. After all, a professional and semi-professional tool has fundamental differences in technical characteristics, which are discussed below.

When choosing a device for hardware foot care, you should pay attention to the following technical characteristics:

• tool power.

It can vary from 15 to 100 watts. For a rare home pedicure, devices with a power of 15-35 watts are suitable. For regular home use, you need a tool with a power rating of 35-60 watts. Professionals in their work use devices with a power of 60-100 W, which can withstand a constant long-term load.

• speed of rotation of the cutter (nozzle).

The quality of the procedure depends on the speed of rotation of the nozzle. However, it is worth remembering that in unprofessional hands, a machine with a large number of revolutions can do more harm than good. Therefore, beginners in the field of pedicure should choose models with a speed of 20-30 thousand revolutions / min. Those who already have some experience in this area can purchase a tool up to 35 thousand revolutions / min. Professionals need a tool with an indicator of at least 35 thousand, while it can reach up to 100 thousand revolutions / min.

• cutter speed controller.

Just a necessary feature for both beginners and masters. In the absence of experience in the field of hardware care, the speed switch will help you get the hang of working at low speeds without unnecessary injuries. Masters, by changing the speed of rotation, achieve the optimal effect depending on the thickness of the skin, nail, etc.

• nozzle rotation direction.

It can be direct and reverse (clockwise and counterclockwise). It is believed that reverse rotation makes the procedure better.

• foot control.

Most often, it is professional instruments that have a pedal for foot control. This frees the hands of the master from unnecessary switching. At the same time, some of the "home" also have a pedal.

• pen shape.

The most important part of the pedicure machine is its handle. Therefore, it is important to consider how comfortable it fits in your hand, and you should select it directly for yourself.

• weight and shape.

This parameter is important for devices that will be used at home. It is important that you feel comfortable carrying it to the place where the procedure will be performed. As for a professional tool, it can be quite heavy and bulky. But this is not a problem - in the salons they are installed permanently and do not require movement.

• types of nozzles and their quantity.

Another important detail of a high-quality hardware pedicure is the nozzles. They differ in shape, size, and each of them has its own specific purpose. When buying a tool, pay attention to its package. The most necessary and frequently used are: conical, cylindrical, flat, polishing, cuticle, brush.

• nozzle material.

Nozzles can be ceramic, diamond, metal, silicone, felt, etc.Each of them has its pros and cons. So ceramic is perfect for beginners, because. they are the safest. However, they wear out pretty quickly. Diamonds are used by craftsmen on a professional basis. Metal ones are suitable for heavily roughened areas and do not create dust. Silicone are used for grinding, felt - for polishing nails.

• additional functions.

Most often, professional models are equipped with additional functionality. Among these additions, we highlight the built-in vacuum cleaner, built-in lighting. They seriously affect the cost of the tool, which does not always justify itself. More useful additional options include a speed switch, a container full indicator, and a rotation direction indicator.

Having dealt with the main technical characteristics of pedicure devices, we will single out the best among their variety. For convenience, we consider two categories of tools: for home and professional use. In each category, we highlight budget, mid-range and premium models.

The best pedicure machines at home

Markclub 100WP

Budget mini-device for manicure and pedicure, powered by household power. Made in China. Despite its small dimensions (weight - about 150 g), it has good technical characteristics: power 50-60 W, rotation speed up to 20 thousand revolutions / min. The handle-milling cutter is equipped with a speed controller. Also surprising is the good equipment: the kit includes 6 diamond and 6 grinding nozzles.In view of the above, we can safely say that this tool is perfect for manicure, simple pedicure, as well as correction of extended nails.

Cost: from 1500 rubles.

• works from the network;
• powerful;
• equipped with a speed controller;
• 12 nozzles in total, for which a special storage box is provided;
• copes with the assigned tasks without any problems;
• The optimum ratio of price and quality.

• no instructions;
• without experience with this tool, it is not immediately clear how to insert cutters.

Beurer MP62

Apparatus for manicure and pedicure of the middle price category from a German manufacturer. The instrument attracts attention with its stylish design and smooth lines. Despite the fact that the device is powered by the mains, its cord, assembled into a spring, does not hinder movements during the procedure and does not interfere. The kit includes 10 sapphire cutters, with which you can process nails and the skin around them. The rotation of the cutters is carried out both in the forward direction and in the reverse direction. At the same time, the tool does not differ in power - only 7.5 W, the maximum number of revolutions - no more than 5400. The number of revolutions is regulated by a step switch.
Cost: from 3800 rubles.

• placed in a case, which provides a place for each part of the set;
• equipped with a cap for nail dust;
• there is a backlight;
• 10 spare disposable sanding tips.

• low power and low speed;
• more suitable for beginners, tk. cutters are not sharp enough;
• does not justify its cost;
• Only "native" Beurer cutters are suitable.

PROMED Feeling

Compact and easy-to-use milling cutter made in Germany.The device is powered by a battery that is charged from the mains (it takes 16 hours to fully charge). The power of the device is 13 W, while it can create rotation up to 11 thousand revolutions / min. It should be noted that the device can operate at lower speeds (7 thousand), a regulator is provided to switch between speeds. Small and light (weight 161 g) tool can be used for pedicure, manicure, nail design. The kit includes 5 tips: 2 stone and 3 sapphire, which are resistant to wear and longevity when used correctly.

Cost: from 6950 rubles.

• does not depend on the network (works on battery power);
• 12 months manufacturer's warranty;
• equipped with backlight;
• The package includes durable nozzles;
• 2 options for the rotation speed of the cutter;
• there is a battery charge indicator;
• The durable case has rubberized pads for a secure fit in the hand.

• Battery life is less than an hour.
• low power and low rotation speed;
• the functionality and final quality of the procedure do not justify the high cost of the instrument.

Beurer MP100

Another device from a German manufacturer, which in its characteristics is close to a professional tool, which primarily affected its cost. It works from the network. The maximum rotation speed of the nozzles reaches 20 thousand revolutions / min, which is enough for high-quality pedicure and manicure. The number of revolutions is regulated by a step switch. In addition, you can change the direction of rotation: clockwise and counterclockwise, which is important for the quality of the procedure.In addition to the technical characteristics, the tool attracts attention with a well-thought-out design: recesses for all component parts, cutters are provided in the body.

The cost is from 13200 rubles.

• quality assembly;
• good equipment: the kit includes 10 nozzles (sapphire and felt), as well as 30 disposable emery;
• convenient and easy to use.

• expensive.

The best professional pedicure machines

Dykemann Nagel M 22

The professional device Dykemann Nagel M22 for pedicure and manicure has a large number of advantages. It is increased in power, but, despite this, it does not vibrate and does not make noise during operation. Stylish black body will fit perfectly into the interior of a beauty salon. Control is exercised by the regulator located on the front side of the device. Speeds switch smoothly, without jerks. On the case there is a handle for easy movement of the device. An LCD display is provided for displaying settings, a foot pedal. Thanks to special protection, the device does not overheat even during prolonged use. 6 cutters in the set allow for high-quality processing of artificial and natural nails, cuticles, side zones, as well as remove calluses.

• works from the network;
• high power;
• stylish design;
• convenient management;
• a large number of cutters in the kit;
• does not make noise or vibrate.

• not detected.

Dykemann Nagel M 33

Dykemann Nagel M33 is suitable for both professional and home manicure. Its main advantage is portability. It is powered by USB and weighs only 300 grams. Its dimensions are also very compact, and the body is ergonomic.Therefore, you can take it with you anywhere, it does not take up much space when stored.

For all its mobility, the device is very functional. Includes 6 cutters of different types for manicure and pedicure. They can rotate in both directions at speeds up to 20,000 rpm. The speed is very smooth. The motor of the device is protected from overheating and can work up to 10 hours without interruption. It is very quiet and does not vibrate at all, which simplifies the performance of even the most delicate and responsible tasks for processing natural and artificial nails. In addition to cutters, the package includes 3 nail files and a handy brush.

• Portability;
• Ergonomic body;
• Productive motor;
• 6 cutters included;
• Simple intuitive control;
• Overheat protection;
• Quiet operation without vibration.

• Not detected.

Iris Professional Smit

Budget professional device from a Russian manufacturer. Despite the relatively low cost (less than 8 thousand rubles), the device has good technical characteristics that allow it to be classified as a professional tool. The motor power is 60 W, the maximum speed is 35 thousand revolutions / min., Which is regulated by a step switch. It can work in forward and reverse modes. For the convenience of the master, there is a pedal that simplifies the control of the device and allows you to turn it on / off without hands.

Cost: from 7550 rubles.

• overload auto-shutdown system;
• digital display, which reflects the operating modes;
• pedal to control on and off;
• pen stand;
• stylish case design;
• collet mode for changing nozzles;
• no vibration.

• a small number of nozzles (4 pcs.).

Strong 210/105L

Professional device for pedicure and manicure from a South Korean manufacturer. In terms of technical characteristics, this model is close to the previous one: power is 64 W, maximum speed is 35 thousand revolutions / min. At the same time, it is favorably distinguished by the built-in cooling system of the micromotor, which allows you to use the tool for 12 hours without interruption. The device is compact, built-in case for cutters helps to keep the tool in order, and with the included bag it is easy and comfortable to transport when working on the road.

Cost: from 10600 rubles.

• reliable and high-quality assembly;
• no vibration on the handle;
• collet attachment system ensures their secure fixation, as well as quick replacement during operation;
• reverse function;
• there are two configuration options: with and without a pedal;
• auto-shutdown option in case of overheating;
• practically inaudible noise;
• reasonable price for this quality.

• nozzles are not included in the kit, they need to be purchased additionally.

Marathon N7New/SH37L (M45)

Another professional device from South Korea. In comparison with similar tools, it attracts attention with the build quality and thoughtfulness of every detail. The handle made of durable plastic with rubberized inserts fits comfortably in the hand and does not slip during operation. It has two stands - in the form of a glass and horizontal. All the switches are located on the front panel of the case: on / off, speed, operating modes, reverse. The device has a high power of 100 W, which allows it to be used in salons with a constant flow of customers.The rotation speed is up to 40 thousand revolutions / min, which is enough for a high-quality pedicure. The operating mode is possible direct and reverse. With the pedal included in the kit, you can smoothly adjust the number of revolutions, which is very convenient for the master, who has both hands free.

Cost: from 19910 rubles.

• powerful and with a large number of revolutions;
• does not vibrate and does not heat up;
• the pedal has two connection and use options: as an on / off pedal and as a speed control pedal;
• collet clamp milling cutters;
• automatic protection against overheating;
• suitable for manicure, pedicure, work with extended nails.

• the cords are a little short.

Brillian White

One of the newest devices is still from South Korea. An interesting and stylish case design catches the eye, which is categorically different from all previous models. Another key difference is the brushless design of the handpiece micromotor, which eliminates wear on its components and significantly extends its service life. In other technical characteristics, this model does not stand out much: power is 65 W, the number of revolutions per minute is 30 thousand. There is a round display on the body, which shows the operating mode of the tool. The machine can work in manual and foot mode, for the second one a pedal is provided in the kit.

Cost: from 25450 rubles.

• the micromotor of the handle is brushless, which makes it more durable in operation;
• direct and reverse mode;
• foot speed control possible;
• digital scoreboard;
• light handle (only 151 g);
• stylish case design.

• not suitable for a salon with a constant flow of customers.

Podomaster AquaJet 40

Premium pedicure machine from a German manufacturer. Even with a cursory examination, this tool betrays its level: solid assembly, thoughtfulness of details, digital display and touch controls, liquid container. This model differs from all of the above in the presence of a spray function, which not only quickly settles the resulting dust, but also cools the treated area. Another advantage of this device is the brushless micromotor of the handle, which is characterized by a long service life. The technical characteristics are also on top: power - 00 W, speed - 40 thousand revolutions / min.

Cost: from 166,000 rubles.

• original clamping mechanism with a strong fixation of the cutter;
• powerful and large number of revolutions;
• spray function;
• does not vibrate and practically does not create noise;
• large display and touch control;
• suitable for long-term work with a constant flow of customers.

• no foot control;
• expensive.

The list of pedicure devices we have reviewed is by no means final, because every year manufacturers try to offer newer and more advanced models. But we tried to highlight the most popular and productive tools for today. In this we were helped by real reviews from both novice masters and experienced professionals who, through trial and error, chose the best options for themselves. We hope our rating will help you make the right choice based on your needs.