Rating of the best obstetric and gynecological chairs for 2022

Every woman needs to visit a gynecologist twice a year for prevention purposes. Preventive examination will help to avoid the appearance of unpleasant diseases, the development of infection or eliminate them in the early stages. For many, this procedure causes discomfort, embarrassment and fear. Some women put off visiting a doctor, even with obvious symptoms of the disease. In order for a visit to this specialist to proceed in comfortable conditions, not only a highly qualified doctor is required, but also a comfortable gynecological chair. A good chair will help the patient relax and create optimal conditions for examination.

Types of gynecological chairs

Although outwardly all types of products are quite similar, but each of them has its own characteristics in the design.Particular attention should be paid to ways to regulate the position of the patient, as well as the presence of additional features that will create comfortable conditions for the client.

Devices with a mechanical method of regulation are designed for multi-stage changes in the dorsal and pelvic region, as well as the height of the chair itself. Typically, mechanical chairs have two levers that adjust the height and angle of the backrest. This version of the equipment is strong and durable, and it can also withstand very heavy patients. But manipulations to adjust the parameters of the chair cannot be carried out after the patient has landed. Usually, the gynecologist pre-sets the optimal parameters that will be convenient for any patient.

The second type of obstetric and gynecological chairs is powered by a gas spring. This option is a pneumatic device that runs on gas energy. To change the patient's position, you do not have to make additional efforts, and there will also be a smooth move, without sudden movements. But such a mechanism can quickly fail. This is due to poor quality ammo. As a result, the back of the chair cannot be adjusted, it will constantly recline to the floor. There will be no further work with such a chair. It is worth noting that work can be restored if the spring is replaced. But it must be specially made for a chair of this brand, have the same parameters as a damaged spring. Unfortunately, a damaged spring cannot be repaired.

The third type includes devices with hydraulic control. The hydraulic design is large and heavy.The piston is installed under the seat and with its help you can adjust the height of the chair. Such a device is quite difficult to operate and maintain, since liquid leakage often occurs due to high pressure. Currently, chairs with such a system are almost never used.

Modern gynecological chairs are equipped with an electric drive, which is an electric motor connected to an adjustable part. In such chairs, it is possible to adjust not only the height or angle of the backrest, but also the change in the pelvic section. The most common drives are from German and Danish manufacturers; in the event of a breakdown, it is easy to find spare parts for them.

Requirements for obstetric and gynecological chairs

Since with the help of this device the gynecologist will not only examine patients, but also perform certain manipulations and even surgical interventions, certain parameters must be taken into account when choosing. Considering all the nuances, comfortable conditions will be created for both the patient and the doctor.

First you need to pay attention to what height the product can fall and rise. How low it can sink affects how easily and quickly a client can sit on it. And the maximum height is required for the convenience of operations or inspection.

The size of the chair plays an important role in choosing a particular model. Large dimensions in a small office will create inconvenience in performing certain manipulations. But also, the back and pelvic section should not be too small, otherwise women with a high body weight or a wide pelvis will be uncomfortable during the examination. In addition to dimensions, the weight of the device itself should also be noted.Electric chairs are heavy, which will make it impossible to move it while cleaning the room. To facilitate this task, it is better to take chairs with wheels.

Consider what weight load this gynecological equipment can withstand. Many models have a maximum load capacity of 100 kilograms. Based on this, it is impossible to accept patients with overweight. Also, given the constant load, such devices will quickly fail.

If you want the equipment you have chosen to serve you for more than one year, then you should also look at the material of manufacture of the components. For example, plastic leg holders will quickly become unusable with frequent admission of patients with considerable weight, and there are a lot of such patients in our country. It will not be possible to replace this design as they are not sold separately. Therefore, it is better to give preference to a foot holder with a metal base. And a good addition would be the ability to adjust the height and angle of this part. To create comfortable conditions for the examined women, it is desirable to have armrests. With their help, it will be more convenient for them to lift, but their presence is not necessary.

Also pay attention to the quality of the lining material. The chair will be used every day, after each patient it will be necessary to treat it with chemicals, and a UV lamp will also work in the office. These factors affect the appearance of the device. After such constant exposure, cheap leatherette upholstery will quickly lose its presentable appearance, and after a while it may begin to tear, which will require its complete replacement.

The best obstetric and gynecological chairs

KG-3M

This gynecological equipment has a non-separable design. The seat height is fixed and cannot be adjusted in height. The angle of inclination of the backrest and pelvic section is regulated by means of gas springs. The backrest can be adjusted from 20 to 100 degrees from the horizontal, and the pelvic section from 0 to 20 degrees from the horizontal. It is possible to set the Trendelenburg position, which is necessary for certain operations in the pelvic region. The footrests are securely fastened to the base of the chair and can be folded down if necessary. The upholstery of the chair is made of vinyl leather, has no seams. Under the cover there is polyurethane foam 40 mm thick. The tool tray is made of stainless steel.

For the convenience of cleaning the office and moving the chair, there are two wheels, and for stability - two supports, one of which can be adjusted.

The length in the full horizontal position of the back and seat is 128 cm. The width of the pelvic section is 50 cm, and its height is 90 cm. The weight of the KG-3M without packaging is 44 kg. The permissible load capacity is 180 kg.

The average cost is 35,000 rubles.

• Convenient adjustment of the back and seat;
• High load capacity;
• High quality lining;
• The presence of wheels and supports.

• Height not adjustable
• The gas spring may come out of standing position.

KSG-02e

This product is suitable for examination of patients, as well as for medical procedures. The main frame is made of steel, covered with a protective polymer powder on top. The cover is made of soft leatherette using seamless technology. Armrests and footrests are also covered with this material.The height of the chair is adjustable with a foot electric drive, and the inclination of the backrest and pelvic section with a gas spring. The backrest angle can be from 0 to 80 degrees, the pelvic section - from 0 to 30 degrees. With the help of comfortable handles, you can adjust the footrests, it is possible to change the height and angle of inclination. In addition, you can adjust the height of the armrests, the desired position is fixed with a screw. The chair is installed on the support legs, has no wheels.

Use a diluted detergent containing hydrogen peroxide to clean this equipment. Strong chemicals are not recommended as they may damage the upholstery. Threaded connections should also be inspected periodically. When loosened, tighten them with a wrench.

The length of the chair is 122 cm, the width is 74 cm, the maximum height is 96 cm. The maximum allowable load is 160 kg. The weight of the equipment does not exceed 55 kg.

The average cost is 58,000 rubles.

• Convenient chair height adjustment;
• Adjustment of the Geppel stands with the help of comfortable handles;
• Seamless lining;
• The product is delivered assembled.

• The equipment does not have wheels.

KGe-410 MSK

This model has a universal purpose. It is suitable for gynecological, urological and proctological examinations and manipulations. The main frame of "KGE-410 MSK" is made of steel alloy, covered with protective powder paint on top. During operation, it will not crack and chip, and it is also completely safe. The soft parts of the equipment have a foam layer and are upholstered in soft leatherette.

The height of the KGE-410 MSK and its headrest is electrically adjustable. The inclination of a back is changed by means of a pneumospring. The tilt angle can be from 0 to 60 degrees. The angle of inclination of the seat is changed using the Rostomat mechanism from 0 to 15 degrees. The base of the footrest is made of metal and has handles for adjusting the height and angle.

Dimensions "KGE-410 MSK" in the position of the chair has dimensions of 125 * 74 * 165 cm, and in the position of "table" - 175 * 74 * 109 cm. The height of the seat can be 48-90 cm. The weight of the product is 85 kg. The maximum allowable patient weight is 120 kg.

The average cost is 86,000 rubles.

• Convenient adjustment of the height of the equipment, as well as sections of the product;
• The upholstery material is resistant to wear and does not cause allergies;
• Sturdy base frame that can withstand heavy loads.

• Mounted on support legs, has no wheels;
• Has no armrests.

KGE-3415 MSK

"Kge-3415 MSK" is intended for gynecological and urological examinations and procedures. The frame and frames of additional parts are made of steel pipes. External metal parts are coated with epoxy paint, which is resistant to mechanical stress and detergents. It is also non-toxic and non-flammable. The soft part of the product has an upholstery made of vinyl leather and a foam layer, creating comfortable conditions for the patient. The base of the chair is mounted on two supports and two wheels that do not have a brake.

The lifting and lowering of the equipment is carried out using an electric drive, which is powered by a pedal. Adjustment of the angle of inclination of the backrest and pelvic section also changes with the help of an electric drive.The backrest angle can be changed from 0 to 60 degrees, and the seat - from 0 to 20 degrees. You can also adjust the inclination of the head restraint from -20 to 20 degrees, changes are made using a pneumatic spring.

The length in the "table" position is 150 cm, in the "chair" position - 112 cm. The width of the "Kge-3415 MSK" is 62 cm. The maximum seat height is 90 cm. The weight of the product is 85 kg. The maximum load capacity is 120 kg.

The average cost is 120,000 rubles.

• Regulation of the position of the components and the height of the chair occurs with the help of an electric drive;
• Sturdy frame;
• External metal parts are covered with powder paint, which is resistant to external mechanical stress;
• Detachable design.

• No.

Belberg 03

This device for gynecological examination and manipulations from a German manufacturer. Height adjustment has a smooth stepless stroke, which is carried out using the control panel. Changes in the angle of inclination of the backrest and seat occurs using a lever mechanism. The backrest angle from the horizontal can be from -20 to 80 degrees, and the seat can be tilted from 0 to 20 degrees from the horizontal. The base frame is made of powder coated steel. The upholstery is made of eco-leather with a layer of polyurethane foam 50 mm thick. This finish is highly durable, which tolerates disinfectant treatment. Supports for arms and legs are made of steel profile and have a chrome finish.

The length of the product in the “chair” position is 112 cm, in the “table” position, including the footboard, it is 166 cm. The width of the Belberg 03 is 94.5 cm. The weight of the device is 90 kg.Maximum load capacity 170 kg.

The average cost is 113,000 rubles.

• Height adjustment with remote control;
• Wear-resistant lining;
• Removable supports for arms and legs;
• Geppel support bed have removable covers.

• No.

Armed SZ-II

A distinctive feature of this model is the ability to control using a remote control or an electric pedal, as well as the ability to install additional equipment. The electric drive regulates not only the height of the product, but also the positions of the dorsal and pelvic sections, and also sets the Trendelenburg position. Such opportunities create comfort for the patient and convenience for the doctor. The casing is made of a soft material that is resistant to wear or disinfectants. The frame of the product is made of durable metal, which has a coating that protects against corrosion.

It is also worth noting that the design of the chair is made taking into account the structural features of the human body, which makes the product ergonomic and easy to use. There is a swivel stand that allows you to place the colposcope. The leg supports have a metal base with adjustable height and angle.

The length of the Armed SZ-II is 187 cm, the width is 94 cm. The maximum load weight can be up to 150 kg. Weight "Armed SZ-II" without packaging is 135 kg.

The average cost is 165,000 rubles.

• Possibility of regulation of a product by means of a pedal or the control panel;
• The frame is made of durable metal;
• The sheathing material is wear-resistant;
• Two color options;
• Ergonomic design.

• High price.

Conclusion

Nowadays, the medical equipment market represents a large selection of products for the gynecological office. When choosing a particular model, convenience for both the patient and the doctor should be taken into account. It will also be a positive point if it is possible to supplement the chair with the necessary gynecological equipment, this will create not only comfortable conditions, but will also reduce the time of admission.