With the help of interior dry cleaning products, you can not only clean individual elements, but also the entire interior, giving it its original expensive look. Often, professional-level tools are purchased for such a procedure in order to carry out the procedure in a garage room. Sometimes solutions are created independently. The latter option is more profitable, because. the cost is lower, and the quality is usually not inferior. Nevertheless, beginners are not recommended to make chemical compounds on their own, because this can adversely affect the expensive interior material. For successful "production" you need to have certain skills.
Dry cleaning is divided into dry and wet. Each type contains both advantages and disadvantages. Accordingly, the products used for dry cleaning also differ in their purpose. Now you can find a quality product in different versions, not only from a Russian manufacturer, but also from foreign ones.
Content
When using wet dry cleaning, a gun acts as an auxiliary tool. The process itself is the creation of a special foam mass, which is distributed with a gun over the inner surface of the car. This cleaning method is perfect for those materials that are resistant to moisture. If you use wet cleaning, for example, on the ceiling of a car, then there is a risk that the trim will sag, which will lead to an unpresentable appearance of the car. For this reason, it is worthwhile to clearly understand which element needs to be cleaned so as not to harm the property. The applied foam should be removed with the same gun or vacuum cleaner. Usually the salon is ventilated at the end of the procedure, because. wet scrubbing leaves some moisture behind.
By dry cleaning, we mean a product after which the condensate does not remain. This results in several benefits:
In most cases, the purchased product contains information on the back, based on which it is clear what type of cleaning the product is intended for. In addition, it is quite useful to read the instructions for use before the process, and not after it is completed. Sometimes a steam generator is used as an addition, but this solution comes from a number of inconveniences.
Accordingly, the question of which dry cleaner will be better is in itself not correct. Each remedy has its own characteristics and a number of contraindications, which makes any choice unique. Simply put, you need to select a specific tool for a specific car, otherwise even the best product will not be able to cope with its task.
Now on the market you can find an incredible variety of dry cleaning compounds from various manufacturers. However, judging by the common opinions of buyers, only 10 of them really stand out and are the most common. However, the quality of any tool depends on the correct approach to use and when choosing.
This tool is one of the most effective for the desired result. Such a tool is considered professional, so it is often used in car washes. However, it has a universal application. Fans of the brand claim that the chemical copes even with very complex pollution, regardless of their "freshness". But such amazing qualities usually require high pay. Therefore, Koch Chemie MEHRZWECKREINIGER has a relatively high price, which does not allow a certain category of buyers to purchase this product.
The body of the bottle contains detailed instructions on how to use. The chemical can be applied either with a special gun or manually. The concentrate in the cylinder must be diluted in the specified ratio (the proportion depends on the complexity of the contamination). If the product is applied by hand, it is recommended to use protective materials so as not to damage the skin of the hands.
The main advantage of the product is the fact that it does not require subsequent washing of the material with water. You just need to wipe the surface with a cloth. Divorces, according to buyers, are absent. The use of such a cleaner promotes the return of the original color and keeps the fabric and leather in its original state, preventing them from stretching. Due to the high alkalinity, the product cannot be used undiluted. In addition, careless use, due to which the cleaner comes into contact with the skin, can lead to disappointing consequences. It is recommended to moisturize the palms after the procedure. The tool is available in different volumes, which contributes to a change in price.
The manufacturer positions his creation as universal. The range of application is quite extensive. It is used when using wet dry cleaning, i.e. application requires the sprayer that comes with the product. Numerous reviews indicate that the manufacturer did an excellent job.
The foam applied to the surface “absorbs” into the dirt, dissolving it, so just wipe it with a towel at the end, removing it along with the dirt. Divorces were not observed. In addition, such a cleaner can be used not only in relation to the car, but also for domestic purposes. Often the product is suitable for processing metal products. Before starting the procedure, it is recommended to study the instructions for use, because. the agent is found in an already diluted form, and not concentrated. The bottle lasts for a very long time.
This creation is recognized as one of the best tools that perfectly cope with complex stains. It is suitable for the most whimsical surfaces. It is used both manually and with the help of automation. When using the first method, the concentrate is diluted with water in the required ratio, and after application it is removed along with contaminants. But it is better to give preference to the second option. Due to the rich composition, the chemical shows quite effective work. It is suitable for "general cleaning" of the car interior, for example, before selling. Like the rest, the cleaner has a high level of alkalinity, which, if used carelessly, can significantly harm the skin. The smart solution is to use gloves.
The volumes of available packages vary significantly, and hence the price too. However, the most sold were liter bottles.
The addition to the main name indicates that no additional equipment is required during operation, and there is also no need to wash off the formed foam. Shaking the can promotes the formation of foam inside. Then it is applied to the surface of the material. Practice shows that the foam is perfectly absorbed and is quite thick. For a more effective result, it is better to remove it with microfiber. Sometimes a brush brings no less productive result.
"Runway" is suitable for cleaning almost all parts of the car.It has a particularly strong effect on traces of coffee, cocoa and products that contain similar components. In addition, after cleaning, a pleasant apple aroma remains. In addition to the standard range of applications, the tool has become widespread in everyday life.
This tool is very similar to the above, because. presented in the form of foam, which effectively fights pollution. Suitable for use on almost any surface, making it practical to use for domestic purposes as well. After work, there is no condensation, and the windows do not fog up. Hence the conclusion that the interior does not require ventilation.
In addition, the cleaner is effective in getting rid of unpleasant odors. Even the most caustic, it not only drowns out, but destroys, which allows you to enjoy pleasant aromas. The method of use is standard: shake the can until a thick foamy mass is formed, apply to the desired place, and then remove. The use of microfiber will help improve the result. However, some buyers claim that the chemical contributes to the fading of the fabric. In order to beware, it is better to test the purchase on similar material.
Red Penguin is inexpensive and practical.It is used both manually and with the use of special devices. For this reason, the cleaner is sold both as a concentrate and as a ready-made solution.
The method of application is standard: apply to the appropriate place, wait until it is completely absorbed, and then wipe the area with microfiber. Although the cost is quite low, however, numerous reviews speak of the excellent quality of the products. It is effective not only for small dirt, but also, if desired, to remove complex stains.
The manufacturer positions its products as a cleaner for fabrics, carpets, and velor. Accordingly, in addition to cleaning the upholstery, the product is often used for other purposes. In addition, it has a great smell and even has the property of restoring color. Judging by the reviews, the result is quite effective, so the chemical may well be used for dry cleaning the car interior. The bottle is equipped with a manual dispenser.
To begin with, the packaging is shaken, after which the contents are applied to the material. Wait no more than two minutes, then remove the dirt. The likelihood of condensation is quite high, so it is better to wipe the treated area dry.
It is used mainly for working with fabrics of any kind. Efficiency is above average.Oil and grease stains are almost instantly removed. However, the product will be powerless if the seat is heavily soiled.
Thanks to the sprayer, the chemical is distributed over the contaminated area. You should not overdo it with the quantity, because. the weathering process can then take a fairly long period of time. After waiting a few minutes, the dirt should be removed using microfiber. 500 ml of cleaner is enough to process the interior of a standard-sized passenger car.
The manufacturer presents its product as an antibacterial agent for dry cleaning of the interior. It is used for processing textiles in both the automotive and household sectors.
The dry cleaning process is the same as with other products described above. It is worth focusing on the fact that the product can be used at a temperature not lower than +5 degrees. In no case should the chemical interact with the skin. If, by negligence, this nevertheless happened, then it is required to immediately wash the affected area with plenty of water. In addition, fumes can also be harmful to health, so you should take care of the protection of the respiratory tract.
The company claims that the composition perfectly copes with the pollution formed on the surface of the car.In addition, it can be used on fabric and carpets. Great for cleaning furniture. The salon does not require long-term ventilation, because. dry cleaning does not leave condensation.
The use of a cleaner is allowed when the temperature is not lower than +15 degrees. Before starting work, the balloon is shaken, and then the contents are sprayed onto the site. Wait no more than 3 minutes before deleting. Judging by the reviews, sometimes you need to repeat the procedure several times. Hence the conclusion that this tool should not be purchased if there is no more profitable alternative on sale.
In conclusion, it is worth noting: if the choice fell on wet dry cleaning, then only professional equipment should be used. A simplified option would be to drive the car to a specialized institution where professionals will do the dry cleaning.
If the dry cleaning of the machine is carried out regularly, then it is worthwhile to comprehensively acquire the appropriate units. This guarantees not only quality, but also speed.
Before using any type of product, it is better to vacuum the interior first. This will increase the efficiency of the result, and also will not create additional problems.
When using specialized equipment, it is strongly recommended to respect the proportions of the cleaner used. If you overdo it with the amount, then this can contribute to the development of fungus and mold, and also create a long-term feeling of discomfort due to moisture.This is especially worth keeping an eye on when cleaning floor mats that are placed on top of rubber ones.
If the stain is not too complex and fresh, then soap and water will come in handy. Although this method is not used for intensive cleaning, it is very effective in some cases, eliminating the need to purchase a professional cleaner. Nevertheless, soap will not get rid of the unpleasant smell, so it often makes sense to buy a specialized product for dry cleaning the car interior.
In the case of using auxiliary materials or brushes, it is better to first consult with a specialist, because the use of the wrong tool at hand can ruin the appearance of the material.