Review of the best Zanussi water heaters of 2022

Hot water is one of the factors of a comfortable life. Now, in order to wash dishes or bathe in the absence of hot water, you do not need to heat it in a saucepan, special devices will do it for you.

The stores provide a wide range of water heaters, among which you can choose both popular models and products of little-known brands. There is also a choice in the price category: it can be both budget and medium options, as well as expensive ones. One of the popular manufacturers is Zanussi.

How to choose the right water heater, navigate the price and learn about the functionality? A review of the best Zanussi water heaters in 2022 will help you avoid making mistakes when choosing, tell you which tank is better to buy, how much each model costs and what you should pay attention to first.

Criterias of choice

1. When deciding which company is better to purchase a water heating tank, it is worth considering the popularity of the models you like among buyers. This information can be obtained by reading reviews and reviews on the Internet.
2. It is necessary to calculate how much hot water is consumed in the family. Based on the calculations, choose the optimal tank volume.
3. Depending on where the device will be located, and for what purposes it is intended, determine its type, heating method, installation, connection and method of water supply.
4. Based on durability, cost and efficiency, choose the optimal heating element.
5. It is necessary to take into account the power consumption of the device, since the way the tank is installed depends on it.
6. Depending on the model, the water tank has various additional functions, the importance of which should be taken into account.

Characteristics of water heating tanks

What types of water heaters are there

1. Cumulative tank type is the most popular according to buyers. The device works on the principle of accumulating water in a container and heating it to a certain temperature, with its subsequent preservation.This type of tank consumes a small amount of electricity, supplies water to all connection points and does not stop working with low water pressure.
2. flowing the tank type heats the water directly at the moment it is turned on with the help of a heating element built into the device. Water heats up quickly, but the maximum heating temperature reaches only 50 ° C. This type is compact, which will not cause problems with installation in a small room. Among the shortcomings, it is worth highlighting the installation of the device in only one point of water supply, taking into account the fact that a special gander or watering can are included with the flow tank.
   Due to the high power of the heating element, the connection may require a direct connection to the shield or a separate power cable.
3. Bulk tank type - a device that does not depend on the water supply system. Since filling the tank with water is done manually from another container. Water is supplied from a built-in faucet or watering can.
4. Instant hot water faucet combines the work of a mixer and a water heater. Water is heated directly in this small and compact device. The maximum heating temperature is 70 °C. The disadvantage of the device is the high power consumption.

Heating methods and their description

1. Electric the heating method is carried out from the mains using a cord that supplies power to the heating element.
2. Indirect the heating method is suitable only for the storage tank. Water heating is carried out using the heat generated by the heating boiler.
3. Combined heating is carried out indirectly and electrically.
4. Gas the heating method is provided for the flow and storage type of tanks. Heating is carried out using a gas burner, with the energy of combustion of natural or bottled gas.

Type of connection and installation of water heating tanks

Tank installation can be wall or floor.

When mounting the device on the wall, it is necessary to take into account its rather big weight. Therefore, the fastening must be of high quality.

Wall mounting can be done in 2 ways:

• horizontal;
• vertical.

The floor unit does not need a strong mount, but takes up a lot of space. Therefore, this type of installation is suitable for large spaces.

The connection to the tank can be:

• top - suitable for installation in a nightstand;
• bottom - when mounted on a wall;
• lateral - in case of a large volume of the device.

Water tank volume

When choosing the volume of the water heater, it is necessary to build on the amount of water consumed, residents and the installation location:

1. If the water heater needs to be installed in a private house, then the best option would be to choose a device from 150 liters.
2. For a large family, a displacement of 100-150 liters is ideal.
3. For a family of no more than 4 people, a 50 or 80 liter water heater is suitable.
4. Water heater less than 30 liters will be enough for 1 person.

Types of heating elements

Heating elements are of 2 types: tubular and spiral.

Tubular a heater is a familiar heating element, which can be “wet” or “dry”. Their difference lies in the fact that a wet heating element is immersed in water without protection, and a dry heating element has a ceramic or steel-enamelled flask that protects it from contact with water. This prevents the formation of scale, which, in turn, prolongs the life of the heating element.

Spiral the heater differs in high cost and durability.

Water heater material

For the manufacture of the inner part of the tank, the following materials are used:

• plastic - the advantage of the material is its low cost, but the quality is poor;
• enamel and glass ceramics - The advantage is that the materials are not subject to corrosion. Their disadvantage is the formation of cracks at temperatures above 60 ° C.
• stainless steel and titanium enamel are the most popular choice of buyers as both materials are strong and durable. Minus - the seams rust over time, but this can be prevented by installing the anode rod inward.

Rating of quality Zanussi water heaters

Zanussi 3-logic 3,5 TS (shower + faucet)

The average cost of the model: 2,290 rubles.

Product dimensions: 27x13.5x10 cm, weighing 1.5 kg.

The warranty from the date of purchase is 2 years.

By purchasing this instantaneous water heater of electric type of heating, in the kit you will receive: a shower, a shower holder, a faucet, a mount, an instruction manual and a water filter of 4 degrees of protection.

A 3.5 kW water heater is capable of heating 3.7 liters of water per minute to a maximum temperature of 50 °C.

Water supply is carried out in a non-pressure way, with a pressure of 0.70 to 6 atm.

Wall mounting is carried out horizontally, with a bottom-type liner.

Please note that the water shut-off valve must be installed only in front of the water heater. This is necessary in order to prevent water pressure on the housing made of plastic. Also, do not neglect the rules of use: after completing water procedures, it is necessary to turn off the water supply.

Mechanical control of the device is carried out by 3 buttons:

1. The on/off button is on the top.
2. To select modes 1 and 2, press the corresponding buttons - I and II.
3. 3 mode is selected by pressing 2 buttons (I and II) at the same time.

The optimal mode for using the Zanussi 3-logic 3.5 TS is III.

The device has indicators for heating and turning on. Temperature limitation is also possible.
Of the additional functions there are: protection against overheating and switching on without water.

• inexpensive model;
• simple installation;
• convenient in operation;
• compact and roomy.

• not detected.

Zanussi ZWH/S 10 MINI U

Average price of goods: 5,190 rubles.

Model dimensions: 32.4x32.4x31.5 cm, weight - 7.5 kg.

The device has a stylish and modern design. Inside the water tank is made of stainless steel with a built-in magnesium anode to prevent possible corrosion of the material.

A storage tank of electric type of heating and 2 kW of power is capable of heating water with a volume of 10 liters to 75 ° C in 19.2 minutes. The pressure is from 1 to 7.50 atm.

Wall-mounted installation of a vertical type has a top connection.

The electric tank is controlled mechanically, by scrolling the regulator to select the desired mode.

The device has heating temperature control, built-in eco-mode and 4 degree of protection against water.

• affordable price;
• stylish design;
• the presence of an eco-mode.

• not found.

Zanussi ZWH/S 100 Symphony HD

The average cost of goods: 7 390 rubles.

Dimensions: 45x87.7x45 cm, weight 28 kg.

Product warranty: 5 years.

The storage tank of the electric heating method with a volume of 100 liters and 1.5 kW of power heats water to a temperature of 75 ° C in 4 hours.The pressure at the inlet to the pressure boiler is from 0.80 to 5.50 atm.
Wall mounting with bottom connection is made vertically.

Management of the enameled tank is mechanical. There is a temperature limit, a built-in thermometer, heating and power indicators.

As protection, a safety valve and a magnesium anode with increased mass are used. There is also protection against water and dust 4 degrees.

• acceptable cost;
• simple control;
• pleasant appearance;
• thermal insulation in 22 mm;
• high protection against water, dust and scale;
• increased weight of the anode;
• silent operation.

• no.

Zanussi ZWH/S 50 Splendore XP

The average cost is: 13,490 rubles.

Device parameters: 43.4x93x25.3 cm, weight - 15.1 kg.

Included with the water heater are: warranty, instructions, protective shutdown device, mount and safety valve.

The storage tank with a volume of 50 liters has an electric type of heating. In 114 minutes, a “wet” heating element of 2 kW heats up water to 75°C. At the outlet, the pressure ranges from 0.80 to 6 atm.

Both horizontal and vertical wall mounting with bottom connection is possible.

A smart LED display that displays the temperature will provide convenient and understandable control. There is an indication of inclusion and the possibility of limiting the temperature.

The interior of the Zanussi ZWH/S 50 Splendore XP is made of stainless steel.

The safe use of the device includes the following:

• safety valve;
• protection against water 4 degrees;
• protection against overheating and switching on without water.

• average cost;
• water heater with electronic control;
• durable and reliable;
• the possibility of vertical and horizontal mounting;
• the presence of a protective connection device;
• high level of device protection.

• not detected.

Zanussi zwh/s 30 Orfeus dh

Average price: 7,990 rubles.

Dimensions: 35x57.5x39.3 cm, weight - 12.1 kg.

The warranty is valid for 5 years.

Storage tank with electric type of heating and dry heating power of 1.5 kW, heats 30 liters of water to a temperature of 75°C in 97 minutes. The pressure is from 0.80 to 7.50 atm.

Wall-mounted installation is carried out vertically, the connection to the device is lower.

Mechanical control is easy and understandable. There is an indication of the water temperature limit, an indication of inclusion and a built-in thermometer.

Zanussi zwh / s 30 orfeus dh provides the ability to disinfect water, protect against overheating and turn off the power when there is a lack of water. There is also a magnesium anode, safety and check valves.

The coating inside the tank is made of enamel.

• low cost;
• fast heating of water;
• water heater with water disinfection function;
• the presence of a thermometer and a magnesium anode.

• no.

Zanussi ZWH/S 30 Splendore XP 2.0

Average cost of goods: 11,890 rubles.

Parameters: 43.4x60x25.3 cm, weight - 10.8 kg.

Warranty period: 8 years.

A storage electric tank with a volume of 30 liters and 2 kW of power consumption heats water to a maximum temperature in 90 minutes.

The water heater is very convenient due to the universal installation method and compactness. The lower type is used.

On the electronic display, you can set the optimum temperature.

The power indicator, water temperature limitation and a thermometer work, which will tell you the heating temperature at the moment.

A safety shutdown device, a safety valve, antibacterial water disinfection and frost protection will ensure the safe use of an electric tank. And the stainless steel coating will extend the safe use for a long time.

It is worth highlighting that the water heater is able to store heated water for a long time.

• moderate cost;
• fast heating of water;
• high rate of heat retention;
• the presence of a thermometer;
• antibacterial disinfection of water;
• frost prevention mode;
• universal installation method;
• the presence of a protective connection device.

• not found.

Zanussi GWH 10 Fonte Glass La Spezia

The average cost of goods is 7,390 rubles.

Device parameters: 33x55x19.1 cm, weight - 10.2 kg.

Warranty: 2 years.

Zanussi GWH 10 Fonte Glass La Spezia, has an interesting pattern that will certainly fit into the design of the kitchen.

The flow gas device, with a capacity of 10 liters per minute, has a thermal power of 20 kW. The pressure is from 0.15 to 8 atm.

The combustion chamber of the column has an open type, the chimney is 11 cm. Electric ignition is carried out using batteries. It is worth noting that the batteries without replacement can work for a year.

Wall mounting is carried out vertically, with a bottom connection.

The device is controlled mechanically, using 2 levers, one of which regulates the power, and the second - the temperature.

You can monitor the water temperature on the display. There is also a thermometer, indicators of heating and inclusion. For safety, there is an overheating protection.

• unusual appearance;
• affordable price;
• electric ignition using batteries;
• protection against overheating;
• built-in display;
• built-in thermometer.

• not found.

Zanussi ZWH/S 50 Smalto DL

Average cost: 14,490 rubles.

Dimensions: 47x86x25 cm, weight - 25.86 kg.

The warranty is 8 years.

Electric storage water heater 2 kW heats up 50 liters of water to a temperature of 75°C in 96 minutes. The pressure at the tank inlet is from 0.80 to 6 atm.

This model range has a distinctive feature in the form of the presence of 2 enamelled internal tanks.
Wall installation is carried out both vertically and horizontally, with a bottom connection.

Mechanical control is easy and understandable. Information about the water temperature can be seen on the display.
There is an indication of heating and switching on, limiting water heating and a built-in thermometer.

It should be noted that the water heater retains heat for a long time.
Protection against overheating and inclusion of an empty tank, safety valve, magnesium anode, protective shutdown device and water protection of the 4th degree, create a high level of consumer protection.

• good price;
• long warranty;
• 2 internal tanks;
• multifunctional;
• vertical or horizontal installation to choose from;
• built-in thermometer;
• long-term heat retention;
• with automatic maintenance of temperature at the exit;
• ease of use;
• high quality material;
• high level of safety in use.

• no.

After reading the review of the best Zanussi water heaters, you can easily choose the best option for yourself. Attention! The above information is not a buying guide.For any advice, you should contact the experts!