Review of the best IDDIS faucets in 2022 - advantages and disadvantages

The mixer is an indispensable plumbing fixture, without which the comfortable life of a modern person is unthinkable. It serves to supply hot, cold water and mix them. People always face a choice: install a faucet from a domestic manufacturer and hope that it will not break in a couple of years, or give preference to an imported brand, which is a guarantee of quality and will last for many years.

Today we will review the best faucets from IDDIS. Let's highlight the advantages and disadvantages, talk about the features and much more. Let's start with the company description to get an idea of ​​the products.

IDDIS

The trademark is not new, as it was registered back in 2004. Engaged in the development of plumbing at affordable prices for residents of Russia.

In addition, IDDIS produce not only mixers, but also their profile is:

• components for mixers;
• everything for shower heads (racks, hoses, etc.);
• wash basins;
• toilet bowls;
• high quality ceramic sanitary ware;
• accessories;
• shower cabins;
• flush cisterns for toilet bowls.

The products are marked with a quality mark, as they correspond not only to Russian, but also to European manufacturing standards.

Rating of mixers IDDIS

IDDIS Classic 27014E1K

A standard representative of a two-valve faucet from the sanitary ware manufacturer IDDIS. Mainly characterized by simplicity and reliability in use. Suitable for installation together with steel bathtubs. The design has two valves - cold and hot water.

The faucet body is made of chrome-plated brass, which is one of the main criteria for durability. The water flow is average - 20 liters per minute with the valves turned out as much as possible. The hose is made of stainless steel.

• reliable design;
• easy to assemble;
• high spout creates a lot of space under the tap;
• acceptable cost of 3,000 rubles;
• control is smooth, without difficulty when turning the valves;
• a large selection of equipment;
• stable fasteners.

• the hot water handle gets very hot;
• despite the aerator in the design, a rather noisy model;
• no automatic switch to shower;
• the filter needs to be cleaned frequently;
• frequent replacement of gaskets;
• in the damp state, the hands glide strongly on the surface of the handles.

IDDIS Viola VIOSB00I02

Single lever mixer tap made of brass. The coating is quite unusual, because it violates our usual standards. This metal easily withstands high temperatures and does not heat up during use. It is also able to withstand increased pressure in pipes.

The 1.5 m hose is made of stainless steel. Unlike the previous model, the built-in aerator is equipped with a mesh for silent operation.

It is controlled very simply, it is easy enough to touch it and turn the lever in any direction you need. Elegant shapes allow you to enjoy the faucet every time you use it.

• modern design;
• comfortable in using;
• does not heat up;
• withstands high pressure in pipes;
• easily adjustable pressure and water temperature;
• the watering can holder is easily adjustable;
• resistant to corrosion;
• the joystick does not slip out of wet hands.

• not the lowest cost of 8,000 rubles;
• few modes at the watering can;
• the wall holder is inconvenient.

Unfortunately, if such a mixer breaks down, it is difficult to find components in our country.

IDDIS MALSBL2i10

Single-handle faucet with long spout IDDIS MALSBL2i10 has a warranty period of 10 years. The entire structure is made of brass, which only confirms the durability. Laconic design and unusual shape will immediately attract the attention of the buyer.

Mixer set includes:

• two reflectors;
• brass eccentrics;
• gaskets;
• wall-mounted shower holder;
• watering can;
• hose;
• spout;
• mixer.

From use, one-touch adjustable water temperature and flow force spout can be distinguished. The faucet shows a good optimization of the water flow.

• easy to use;
• 10 year warranty;
• adjustable in one touch;
• convenient shower hose;
• price: 6,000 rubles;
• shower switch mechanism works smoothly

• the mixer needs some time to switch from cold to hot water;
• the shower holder is attached separately.

IDDIS Calipso CALSB00i01

Single lever basin mixer IDDIS Calipso CALSB00i01 is made of brass, chrome plated on top. Standard manufacturer's warranty for faucets is 10 years. Quality and design meet all the requirements of the Russian buyer.

The design for the faucet was developed by engineers from various continents and countries. Therefore, this model can be called one of the most successful for IDDIS.

The model will last for many years if you often clean the aerator mesh. This can be done simply by swiping it with two fingers. The design allows you to carry out this procedure at any time convenient for you.

• adjustable aerator;
• low cost of the mixer;
• easy to install by yourself;
• service life is increased;
• cost: 5,000 rubles;
• the main material is brass and chrome plating ensures a long service life of the faucet;
• ceramic mechanism;
• specially designed design;
• smooth adjustment of water temperature;
• compact dimensions.

• hoses are attached in the depth of the tap;
• high pressure at maximum;
• weak fastening.

IDDIS Alborg K56001C

The IDDIS Alborg K56001C single lever kitchen faucet brings a sense of solidity to an installed kitchen. This is exactly what the manufacturers of this brand of plumbing are trying to achieve. It is also, like all other mixers, made of brass.The top layer, which is a chrome plating, will protect the faucet from corrosion for many years.

The lever switches very smoothly, does not require additional effort to switch from cold to hot water. If desired, you can install the crane in one position convenient for you, lower it and use the same position for the next use without turning it on different sides.

Ceramic cartridge. Built-in aerator with a special mesh that suppresses noise. The complete set is standard, exactly the same as for all other mixers of this type.

• the lever is soft;
• the aerator does its job perfectly;
• the aerator is also easy to clean;
• spout turns well;
• perfect for deep washing;
• affordable price: 3,500 rubles;
• comes with a ring for secure fastening;
• long service life;
• stable fastening.

• very strong pressure when turned on to the maximum;
• short flexible hose.

IDDIS Natal 37102T7+T12

At the time of release, all modern trends were combined in this faucet. The best engineers of the company took part in the development of design and technical equipment. They tried to convey to the buyer the most daring ideas.

The two-arm mixer meets all the quality requirements of our country and the European Union. The case is made in a classic form of brass with a chrome finish. It is unique that a thicker layer is applied than on other mixers from other manufacturers.

There is no aerator included, but the faucet does not need it. The device is designed in such a way that when the maximum water pressure is turned on, the mixer will create a minimum of noise.

• modern design;
• complies with GOST quality and manufacturing standards in the European Union;
• main material - brass;
• thick chrome plating;
• corrosion protection;
• 10 year warranty;
• hard type of eyeliner.

• average cost in the market: 7,000 rubles;
• there is no aerator;
• with a weak tightening of the set screws, the crane may hang out;
• there is no bottom valve;
• quite difficult to install.

IDDIS Zodiac ZODSB02i02

Bath faucet, single handle, brass, oversized nickel-chrome plating, Softap ceramic cartridge, ceramic diverter, Neoperl silicone aerator.

The representative of the Zodiac line is made of high-strength chrome-plated brass. Modern technologies for casting and processing of the base material and increased wall thickness of the outer coating reliably protect the mixer from temperature and pressure drops.

Nickel-chrome plating meets the highest European quality standards, provides corrosion resistance and provides a mirror-like gloss finish. Does not lose its qualities throughout the entire period of service.

The standard set includes:

• watering can;
• stainless steel hose.

The guarantee for the mixer is 10 years, for the watering can and the hose 1.5 m long - 5 years.

• made of high strength brass;
• increased chrome plating;
• 10 year warranty;
• the guarantee for the watering can and the hose is 5 years;
• classic design;
• the mixer does not lose its external qualities throughout the entire service life;
• average cost in the market: 4,000 rubles;
• The hose is equipped with a kink protection.

• on a glossy faucet, prints and traces of dirt are most noticeable;
• if the mount is not tightened with a sufficiently large force, then the mixer will hang out.

IDDIS AL3PB0Gi05

The faucet is specially designed for the kitchen sink. Despite all its advantages and built-in mechanisms of the latest generation, it is considered one of the cheapest on the market. Its average cost does not exceed 3,000 rubles. Why is it so cheap?

The standard manufacturing metal is brass, and the coating, unlike all other models, is called Granucryl. It is made of granite. It costs a little less than the chrome coating, but is in no way inferior to it. In this case, you can choose any color you like for application. Its advantage is a matte finish, which does not show fingerprints and dirt. In addition, cleaning such a faucet is much easier.

The built-in aerator with special noise suppression mesh is easy to clean with a light swipe of two fingers. Also included in the package:

• flexible eyeliner;
• fasteners;
• plastic spacer for fixing the mixer.

• innovative coating;
• modern design;
• average cost: 3,000 rubles;
• body material is brass;
• the spout turns easily;
• granite flooring:
• no traces of dirt are visible on the matte surface;
• The cover is easy to clean.

• after a few years, the mechanism may begin to seize.

IDDIS EDISB00i01

The main material of the case is brass with a chrome plating. The mixer is single-lever, it is intended for installation on a sink (washbasin). The horizontal mounting type is considered one of the easiest to install and use.

It is compact in design and has no extra parts. An important feature is the presence of an aerator and a ceramic cartridge.Due to them, the device will last for many years and keep the water clean. There is also a noise suppression function installed in the aerator. Also, the faucet does not leak because it closes tightly.

You can assemble and install one of the plumbing items with your own hands. You do not need to have special knowledge in this area. Therefore, the IDDIS EDISB00i01 mixer has received many positive recommendations from customers.

• easy to install;
• made of brass;
• chrome plating;
• horizontal mounting type;
• compact;
• noise suppression function;
• 10 year warranty;
• the faucet is not leaking;
• low cost: 4,000 rubles.

• traces are visible on the surface;
• need to be washed and cleaned frequently;
• installed on the sink only.

IDDIS Torr TORSB00i08

One of the best faucets from IDDIS. The body material, as usual brass, has a thick chrome plating. Because of this, the faucet has a pleasant shine. Unfortunately, this has one big drawback - such a mixer will have to be cleaned often, because fingerprints and dirty stains remain on it.

The set comes with a hygienic shower, which is designed for washing dishes or hands. The shape is pleasant, rounded, the handle does not slip out of the hands. It greatly simplifies the performance of all household chores. It is enough to pick it up, turn it on and you will get rid of dirt on any surface. At the maximum level of pressure does not make noise.

Operated with a lever. There is also a button to switch from one watering mode to another. Very easy to install in the sink. You can install the mixer yourself. The hose is attached separately to the wall.

The design is developed in a modern style in compliance with all the conditions that customers require for a mixer. Engineers not only from Russia, but also from Europe took part in the development of design and technical equipment. We can say that it also meets the requirements of foreign buyers. A lot of effort and time has been invested to achieve the perfect combination of reliability and practicality. It comes with a standard 10 year warranty.

Equipped with:

• aerator;
• shower head;
• flexible eyeliner;
• fasteners;
• interlayers;
• wall holder.

• made in a modern style in accordance with the requirements of the residents of Russia and the European Union;
• low price: 5,500 rubles;
• convenient fastenings;
• comes with a wall mount;
• simply turns on and off;
• water temperature is easily adjustable;
• operated by one lever;
• basic materials - brass and chrome plating;
• 10 year warranty;
• can be installed by yourself.

• the holder can hang out;
• frequent cleaning of the mixer;
• the watering can has a separate mount;
• high water consumption at maximum inclusion.

Conclusion

Summing up, IDDIS mixers have the following positive components:

1. They are divided into a large number of types according to purpose, design and purpose;
2. Meet all the design requirements of the modern buyer;
3. Comply with GOST standards in our country and Europe;
4. All mixers have an average market price;
5. The buyer has a choice between a matte and glossy finish;
6. Cartridges do not make noise even after 6 years of use.

All of them largely outweigh the negative aspects of mixers from the manufacturer IDDIS.The company has worked its products in such a way that each buyer can find exactly what he was looking for. A wide variety of designs, from classic to modern, matte or glossy finish, an increased layer of chrome plating and brass, taken as the main manufacturing element, will create a sense of reliability for the buyer.