Review of the best rotary hammers from Interskol in 2022

Interskol products are conceived as an analogue of foreign instruments. The domestic manufacturer supplies equipment with the same filling as foreign competitors, but due to the absence of duties and the use of local materials in the manufacture, the final price tag shows a more democratic figure. Fenders and perforators Interskol are in considerable demand, because for an adequate price the buyer receives a universal device that is indispensable in large and small construction works. Perforators of the Russian manufacturer are divided into 2 classes: for domestic use and semi-professional. An experienced master, versed in the technique of work and types of drilling equipment, can easily achieve impressive results from the semi-professional chipper Interskol.

history of the company

The company turns 28 in 2022.More than a quarter of a century on the market is an indicator that guarantees reliability. The campaign was founded by enthusiasts on the basis of the former research institute.

Given the multiple upheavals of the economic and ideological order that took place in the country at that time, it is not difficult to imagine what the company had to go through over the past 20 years. Despite multiple difficulties, Interskol survived, which means that the manufacturer is trustworthy.

The best perforators Interskol

Interskol P-18/450ER

Perforator Interskol P-18/450ER (66.0.3.00) is completed with a branded case. Standard modes (drilling/impact drilling) available. The impact mechanism works in conjunction with vacuum compression, which increases the efficiency of the workflow by several orders of magnitude. Reverse rotation will help to cope with stuck consumables.

• Convenient speed control;
• The device board is protected from network interruptions;
• Ergonomic shape of the tool;
• Democratic price tag;
• Strong build.

• The chiseling mode only works in conjunction with the rotation mode.

Review:

“In our team, the P-18/450ER model provokes endless disputes. Someone considers it not powerful enough, but many still understand that you cannot find a better device for such a low cost. Concrete structures up to 1.5-1.6 cm thick are given to the perforator easily, they do not provoke overheating. Thinner materials, like wood products, lend themselves without problems. If you choose the drill correctly, the results are guaranteed: the device is able to combine the functions of several tools at once. With such a low price tag, I recommend the model to anyone involved in repair work!”

Interskol P-28/800EV

P-28/800EV is a semi-professional vertical network instrument.Three-mode (drill / drilling / slotting), the depth of the working nozzle is regulated by an additional handle (included in the kit). The principle of crank mechanics guarantees a strong impact. The vertical engine, due to its location, is less exposed to shocks and jumps. A well-thought-out arrangement and shape of the handle will provide a distinct mechanical stabilization of the device during operation. The reverse will help to deal with the wedge, if it occurs. The cable is surrounded by rubber and reinforced in areas that require it. Cartridge model P-28/800EV allows you to block the nozzle using a special mode.

• Powerful blow due to the crank mechanism;
• Proper location of the engine;
• Nozzle locking function;
• Reinforced cable.

• Lack of springs in the handles.

Review:

“The P-28/800EV model in my hands went through the most serious tests, because I work a lot, but in terms of conditions I am not selective. It was repaired only once, unlike the previous chippers, which stably went to rehabilitation once every 2 months. Even that single failure was allowed due to personal inattention, and not because of the shortcomings of the Interskol engineers. Of the pluses, I note the form factor of the tool: in hard-to-reach places, the P-28 / 800EV model is indispensable, and during long-term work, hands are not taken away (this is due to the competent distribution of the weight of the device). Also, an impressive impact force with economical power consumption and an adequate cost of the tool itself. The only downside is the lack of springs on the handles. Vibrations could be minimized with springs, and limiter adjustment would be more convenient. All in all, the instrument deserves a recommendation!”

Interskol P-22/620ER

Dual-mode rotary hammer, suitable for cutting the most common materials, such as stone / concrete products, wood and metals. The SDS standard chuck guarantees easy changing of bits, and the reverse rotation helps to eliminate the wedge or unscrew the fasteners. Drilling and impact drilling are implemented in the P-22/620ER model at a professional level. Convenient adjustment of the speed during drilling will allow the master to easily set the desired parameters without being distracted from work. The protection sleeve protects the drill from the wedge. The handle is surrounded by special rubber, which, with the low weight of the device itself, allows you to work for a long time and not experience significant discomfort. The electronic filling is arranged correctly: the device does not produce loud noises even at high engine speeds. All handles are included with the P-22/620ER model. Also, the puncher is completed with a branded storage case for the device and related parts.

• Price;
• Good power performance;
• Thoughtful body shape.

• Not found.

Review:

“I got the model P-22/620ER after a bad experience with a hammer drill. The task was to drill a concrete structure, but the power of the drill was not enough. The punch was selected from the cheapest, but powerful enough to cope with everyday tasks. The product from Interskol named P-22/620ER turned out to be the most suitable. With all the above tasks, he copes perfectly, besides, the branded case allows you to store the tool so that it does not interfere when it is not needed. “

Interskol P-20/550ER

Perforator Interskol P-20/550ER is one of the most ergonomic and simple representatives of Interskol chippers.It carries one mode of operation (impact drilling), but due to the absence of other functions, the overall mechanical design of the device is the most robust. A protective sleeve will reduce the risk of jamming, and a limiter (included) will not allow the master to go beyond the specified depth. The engine is located vertically, which makes the P-20/550ER model the most successful for working in narrow spaces. Adjusting the speed will allow you to conveniently adjust the tool for a specific material. The chuck carries all the technology to make tool changes effortless. Miniature size and ergonomics of the device guarantee comfortable operation for a long time of work. The P-20/550ER model is equipped with an additional side-mount handle, a drill limiter and a case from the manufacturer.

• Sturdy build;
• Vertical motor;
• Small dimensions.

• Only one mode (impact drilling).

Review:

“I work with complex objects, so I often have to deal with hard-to-reach places. With such specifics of work, it is necessary to have a miniature chipper with a vertical engine and the P-20 / 550ER copes with such inconvenient tasks better than others. In view of the absence of other modes, except for impact drilling, the latter is implemented with maximum quality. With all common materials, such as concrete, brick or plaster coating, the hammer drill copes with ease. An indispensable device of a narrow profile, has never caused any complaints from my side. I recommend it to anyone who has to deal with hard-to-reach places. “

Interskol P-32/1000E

Perforator Interskol P-32/1000E two regime.The company's engineers provided the P-32/1000E model with the ability to adjust not only the rotational speed, but also the frequency and force of chiselling. Electric brushes are replaced conveniently and quickly thanks to special mechanisms. Installation of the handle is acceptable both on the side and on the lower edge. The main handle is surrounded by rubber and equipped with a cushioning system. Diode indicators will tell you when it's time to change the brushes, as well as the presence of power. Wire length 4 m.

• The ability to adjust both rotation and shock;
• Brush change indicators;
• Convenient handle attachments.

• The puncher is heavy, not suitable for everyone.

Review:

“It's rare that a mid-segment fender carries too much power. Minor work with the P-32 / 1000E model requires extreme caution, otherwise the chipper blows everything apart. The use of small-diameter drills is unacceptable - the P-32/1000E simply crumbles them into pieces. There is no simple drilling mode, but the slotting mode works with a bang. Weighty, even too much, but it takes any obstacles, and thanks to its small size it is hard to reach. The device creates serious vibrations when chiselling, but the cushioning of the handles extinguishes this unpleasant effect. I recommend to physically strong masters!”

Interskol PA-10/14,4R-2

Interskol PA-10/14 is a two-mode chipper powered by a battery. Suitable for processing all common materials, such as concrete, stone, brick, metal products. The drilling mode makes it possible to use PA-10/14.4R-2 to work with fasteners. Switching between modes is done using a convenient key on the tool body. Spot lighting is integrated into the body.The battery is removable, which makes it possible to change the discharged battery to a charged one (included). The cartridge of the SDS standard is equipped with the mechanism for quick change of tips. The reversible function will solve the problem of drill stuck.

• Set with 2 batteries;
• Spot lighting;
• Reverse function.

• Not found.

Review:

“Complete batteries are of very high quality, I measured their performance on third-party devices, and they inspire confidence. The puncher itself is light, conceived as a convenient portable tool, and fully justified the idea. The focusing of the backlight is precise, even with a short snap, the light hits exactly on target. Charging each battery will not take more than half an hour, and if you charge both energy carriers in advance, you can be sure that the fender will work all day. Batteries require warming up, in my case they revealed their full potential only after a couple of cycles. The 3-eye indicator tells you if chiselling/drilling is appropriate at a certain charge level, which is convenient. An additional plus is the function of fixing the working element in the cartridge. Model PA-10/14.4R-2 deserves a recommendation!”

Interskol P-45/1000E

A professional tool designed for the most difficult tasks, such as chiselling strong concrete or masonry, creating grooves, processing metal structures. Model P-45/1000E carries high power and is designed for large construction sites. The SDS format chuck has all the characteristic mechanisms, and also supports large-diameter rigging. Even in a thick layer of strong concrete, the P-45/1000E model will easily make a hole up to 10 cm. in diameter.The key for switching between drilling and slotting is pressed gently, so the master does not need to be distracted from the process to change the mode. The gearbox is enclosed in a metal case, which provides reliable protection of internal parts from mechanical damage and evenly distributes heat, preventing overheating. The speed adjustment wheel moves smoothly and does not require effort to set the desired parameters. Vacuum compression mechanism guarantees a strong impact (up to 8 joules). There are several variations for attaching the tip, so the user can easily choose the most convenient chiselling angle. The start key is weighted, which prevents unexpected jerks at the start of work, and an additional clutch will protect the equipment from breakage. The P-45/1000E model is completed with a branded box and an additional handle for mounting on the side.

• Power;
• Soft travel of the switching keys;
• Weighted launch key;
• Vacuum compression provides strong impact;
• The gearbox is protected from overheating;
• Several drill fixation patterns;
• Price;
• Equipment.

• The cost of consumables;
• Hands get tired with prolonged use.

Review:

“An excellent chipper, was purchased to create strobes, dismantle various materials, drill walls for communications and other holes. Easily copes with concrete structures, even monolithic ones. With rich dexterity, with the help of P-45 / 1000E it is possible to process even load-bearing structures. Crowns for such power are expensive, but they guarantee results. If you have high-quality crowns, you can drill more than 10 holes for communications of different diameters.The function of fixing the drill allows you to quickly dismantle strong structures. Recommended to professional builders!”

Interskol P-26/800ER

Perforator P-26/800ER is a device with 3 classical modes. The manufacturer conceived this model as portable, but it cannot be called as such, since a wired connection is required for the tool to work. Nevertheless, the P-26/800ER model can be used without difficulty, which means it is recommended for work with ceilings.

• Drill protection by means of a special clutch;
• Reverse rotation;
• Convenient adjustment of the frequency of chiselling and revolutions;
• Weighted start button.

• Poor quality handles.

Review:

“Model P-26/800ER causes ambiguous impressions. It does a great job for its intended purpose, i.e. chiselling and drilling, but the terrible handles and their strange placement slightly spoil the impression of the overall experience. Otherwise, the hammer drill is excellent, especially considering its small dimensions, low weight and adequate price. I recommend it to ceiling masters, or just for domestic needs!”

Outcome

Interskol offers quality products that are in no way inferior to imported tools, but at an affordable price. It is recommended to choose an Interskol perforator, starting from the specifics of the activity, because the manufacturer offers a wide range of chippers for any task.