Review of the best sledgehammers for 2022

A sledgehammer is one of the most powerful and reliable tools designed to destroy various surfaces and drive heavy anchors and hardware. To date, manufacturers produce several types of percussion instruments, which will be discussed in this article.

Sledgehammer Selection Criteria

Before purchasing a percussion instrument, it is worth considering the following parameters, on which the efficiency and safety of work will depend:

1. The weight and shape of the striker. Often, strikers of various shapes and masses are installed on sledgehammers. The best tool is one that has a combined percussion element. There are flat and sharp-nosed strikers. The latter option is effective for destroying surfaces and for performing more precise work. Flat type elements are widely used in construction and blacksmithing. Such a tool has a huge shock mass. Depending on the goals, you can choose the weight of the impactor, which will vary from 1 to 7 kg.
2. Striker material. During the manufacture of the impact element, special attention is paid to the wear resistance and durability of the striker. The problem is that over time, the striker can be subjected to mechanical deformation due to the application of powerful blows. The use of tool steel, which is forged, helps to protect the tool from losing its original shape. As a rule, the level of hardness of the striker material must reach 55 HRs, so selective hardening technology is used, which simultaneously strengthens the metal structure and makes the internal composition of the impactor softer. Thanks to this, the tool is protected from the formation of cracks. The essence of hardening is to heat the metal by passing a high-frequency current through it.
3. Handle material. Most of the tool is occupied by the handle, which plays an important role during the work. First of all, the safety of the master depends on it, and then the impact force. Basically, wooden handles are used in the manufacture of sledgehammers. By standards, hardwoods such as walnut, birch and beech are used.The advantage of wooden handles is low cost, maintainability and reliability. Of course, over time, the main coating of such a handle begins to wear out, and the shock vibration is completely transferred to the worker's hands. Therefore, it is best to use a fiberglass handle, which is not only reliable and durable, but also provides safety and comfort during operation. Vibration during impacts is absorbed by the inside of the handle, and rubber inserts provide easy holding of the tool in your hands.

The best lightweight models

Such sledgehammers are widely used in blacksmithing and car mechanic business. The tool, not exceeding the weight of 3 kg, is manufactured by both foreign and domestic manufacturers. The following models fall into this category.

Matrix 10922 - 1200 rubles

The tool is a bright representative of the ideal ratio of reliability and strength, which is why it is widely used during plumbing and blacksmithing. The sledgehammer is designed for crushing surfaces, creating and driving large hardware. The main advantages of the inventory include a forged striker, due to which the tool has increased strength. The material for the impactor is 50 steel and the hardness setting is 52 HRs. Safety and comfort during operation is provided by a fiberglass handle, which dampens the shock load with a rubber pad. The mass of the tool is 3 kg, and the length is 900 mm. The Matrix 10922 sledgehammer is one of the best lightweight options out there.

An ordinary buyer notes a comfortable handle, a durable impact element and a long service life of a sledgehammer.In work on construction sites and small workshops, the tool is indispensable.

• Durable forged impactor;
• Rubber pad on the handle;
• Attractive price;
• Long service life;
• A light weight.

• Not found.

King Tony 7833-20 - 1200 rubles

The next best sledgehammer in the ranking is the Taiwanese tool King Tony 7833-20, which can surprise with its small dimensions (300 mm) and light weight (2.1 kg). The striker has a square shape, and its surface was processed using selective hardening. Hazel was used as the material for the handle of the tool, thanks to which the inventory is light in weight. The manufacturer took care of comfort and made a comfortable grip on the handle. The impact element has a reliable connection with the base of the sledgehammer, an adhesive composition is applied between them. This tool is widely used in the dismantling of structures and during car repairs.

The consumer notes King Tony 7833-20 as a convenient and compact tool that is easy to carry out any plumbing work. The main drawback is the material of the handle.

• Durable striker;
• A light weight;
• Strong connection of knots;
• Small length;
• Low cost.

• Wooden handle.

Fiskars 1020218 - 2500 rubles

This one-handed Finnish tool shows real aggression during dismantling and locksmith work. It is worth noting that the assembly of the sledgehammers of this company is made in China, but this does not affect the quality at all. Light weight (2.15 kg) and small base length (350 mm) contribute to easy holding in one hand.The impact element was made by forging, after which it was subjected to heat treatments and induction hardening. One end of the tool head has a pointed shape, which contributes to the wide use of the sledgehammer in various fields. The two-component handle significantly reduces vibration, which contributes to the convenient use of the sledgehammer during the destruction of surfaces.

Buyers praise the tool for reliability, durability, convenience and versatility of use. The only negative is the high cost.

• Unusual head shape;
• Reliability and durability of the tool;
• Tool versatility;
• Small dimensions and light weight.

• High cost - 2500 rubles.

Inforce 2000 59070 - 700 rubles

One of the best models designed for repair, plumbing and household work. A distinctive feature is the presence of a fiberglass handle, which is impregnated with glass fibers. Such a coating improves the perception of the base to vibration waves and mechanical shocks. The handle can withstand high temperatures. The weight of the tool is 2 kg, which is quite enough for leveling thin surfaces and clogging hardware. As a protection, the handle has limiters that will not allow the tool to slip out of your hands.

The buyer appreciates the sledgehammer for its compactness, convenience and reliability.

• The shock element has protection against moisture;
• The handle is equipped with limiters and covered with glass fibers;
• The presence of rubber pads;
• Durable and wear-resistant striker;
• Handle with vibration absorption;
• Small base length - 280 mm;
• Long service life.

• No.

Sibrtech 2000 10918 - 760 rubles

Sledgehammer Sibrteh 2000 10918 is the best lightweight option with a forged head and a weight of 2 kg. The material for the shock part was carbon steel, which was forged to a depth of 30 mm. Such a move makes it possible to destroy concrete coatings and drive in metal nodes.

The surface of the impact element is made evenly, thanks to which the tool is in excellent contact with the workpiece.

• The presence of fiberglass in the composition of the handle, due to which depreciation is improved;
• Strength and reliability of the tool;
• Installed rubber pads on the handle;
• Small length of the base;
• There is a lace holder on the bottom of the handle.

• Not found.

Vira 800 902080 - 350 rubles

Quite an easy option, designed to destroy small structures. The tool consists of a striker, which weighs 800 grams, and a base covered with impact-resistant plastic and thermoplastic rubber. The length of the handle is 240 mm and the coating thickness is 1.5 mm. The impact element has a spherical shape and is made of hardened tool steel.

Consumers speak of Vira 800 902080 as a compact sledgehammer that easily copes with the tasks. The handle and the high strength of the striker are worthy of praise.

• Two-component coating of the handle;
• Low cost - 350 rubles
• Compactness and efficiency of the tool;
• Easy transportation of the sledgehammer.

• Too light striker;
• No hole for lanyard.

Hart HS8FSDB 5132002971 - 3700 rubles

Lightweight sledgehammer Hart HS8FSDB differs from other models in the cruciform shape of the striker, due to which the impact force is increased up to 50%. Otherwise, it is worth noting the high strength and wear resistance of the head, the material for which was high-alloy and heat-treated steel. The tool is ideal for working in narrow spaces and demolition of concrete structures.

• Cross-shaped striker;
• High head strength;
• Ability to work in narrow spaces.

• Too high cost - 3700 rubles.

Top Medium Models

Medium weight tool ideally combines versatility, strength, compactness and low cost. Sledgehammers of this type are designed for blacksmithing, construction and domestic work. This rating includes the following models.

Stayer 20110-6 — 1600 rubles

It is a powerful German-Chinese-made tool that weighs about 6 kg and provides an enormous impact. The handle of the sledgehammer is made of fiberglass material, and the worker's hands are protected by a rubber corrugated pad. Thanks to this surface, the tool sits firmly in the hands during strokes. The head is made of high-alloy steel, which has undergone selective hardening with high-frequency currents, due to which the impact element has increased hardness. Expert opinion says that the Stayer 20110-6 sledgehammer is the best representative of the middle category.

On the territory of the Russian Federation, the product of this manufacturer has long won the title of a reliable tool that has unique technical characteristics and reasonable prices.

• Corrugated surface of the handle;
• Protection against shock loading and vibration;
• Increased hardness of the impact element;
• Relatively small dimensions of the tool.

• Not found.

Sturm 1011-02-5000 - 1600 rubles

The German manufacturer has made a truly devastating tool that has a handle length of 890 mm. The advantage of the tool lies in the increased impact load due to the large shoulder. The head of the sledgehammer is made of hardened tool steel, and therefore, the impact element withstands enormous loads. The handle is made of fiberglass, and the surface has rubberized pads that absorb shock, absorb vibration and contribute to a secure hold in the hands.

The consumer notes the durability and reliability of the tool. Also worthy of praise is the comfortable handle and the destructive power of the sledgehammer. Unfortunately, it is not suitable for other areas of work.

• The presence of rubber pads;
• Comfortable handle;
• Durable impact element;
• Reliability and durability of the tool.

• Limited use of a sledgehammer.

Zubr 20111-4 — 1500 rubles

This tool has a fairly low cost, due to which it is considered one of the best in its category. The main part of the sledgehammer is considered to be a forged head weighing 5 kg, which is made of tool steel 55. The working surface of the impact element was processed by induction hardening. The manufacturer focused on safety and ease of use, as the sledgehammer handle is made in accordance with AVT technology. Thanks to it, the upper part of the handle dampens vibration waves.Another plus of the base of the tool is a good grip. The handle is firmly held in the hands due to the presence of a ribbed surface.

The buyer praises the tool because of the low cost, convenient use, strength and durability. The only drawback is the low weight of the percussion element.

• The head was subjected to induction hardening;
• The worked out surface of the handle;
• Strength and reliability of the tool;
• Low cost.

• Light head weight;
• Impressive dimensions.

Santool 5000 030820-500 - 2000 rubles

A good Polish-made tool weighing 5 kg, designed to destroy hard surfaces and clog hardware. The long handle (900 mm) is made of fiberglass and has a rubber coating, making it much more comfortable to hold the tool in your hands during strong impacts. The lower part of the base is covered with a ribbed layer, since with a wide swing there is a possibility of the sledgehammer slipping out of the hands.

• Reliably fixed striker;
• The presence of a hole for installing a lace;
• Rubberized handle with ribbed surface;
• Excellent weight-to-length ratio;
• The ability to control the strength of the impactor nozzle.

• The high cost of a sledgehammer - 2000 rubles;
• The handle stop is missing.

Vira 5000 900250 - 2400 rubles

This tool has found its application in the field of installation work, including driving large hardware. The sledgehammer is great for working in narrow places, as the upper part of the base is covered with a special rubber protection that protects the handle from accidental damage.In addition, this node allows you to hit the surface with all your might, without fear of damaging the handle on the side.

Another advantage is the thin base of the handle, thanks to which the tool allows you to apply both sweeping blows and light taps.

• The fiberglass base is resistant to temperature changes and protected from moisture;
• Suitable length for strong impacts - 900 mm;
• The presence of a rubber limiter that protects the sledgehammer from accidental flying out of the hands;
• There is a rubber protection of the shock element;
• Long service life;
• Memorable appearance.

• High cost - from 2400 rubles;
• Large weight - 6 kg.

Top Heavy Models

This tool is designed exclusively for demolition work or for driving heavy objects. In rare cases, it is used in blacksmithing for metal forging. For successful use, the employee must have serious physical training.

Topex 02A511 - 3100 rubles

This model is considered the best heavy tool for dismantling and forging work. The efficiency of the process is ensured by a 10 kg impact element, combined with a wooden handle 990 mm long. The total mass of the gun is 11 kg, so it is not surprising that the tool has an enormous impact energy. The Polish manufacturer took care of the quality of the handle and protected the base from dirt and moisture with a varnish coating. The main advantage of a sledgehammer is a combined striker, which expands the scope of the tool. Strong adhesive composition connects the base and impact element.

Buyers note Topex 02A511 as a tool that is almost impossible to find an analogue.The sledgehammer is distinguished by its high power and reliability, but it causes a lot of difficulties due to its weight.

• Durable and wear-resistant impact element;
• The presence of a varnish coating;
• Colossal shock energy;
• Combined striker.

• Wooden handle;
• High cost - 3100 rubles.

Pavlovo 7000 10965 - 1300 rubles

Another worthy tool designed for blacksmithing. Such a move is due to the presence of a special striker, which has undergone selective hardening. The impact element is coated with an anti-corrosion layer, and the main part of the sledgehammer is made of wood. In blacksmithing, a wooden handle plays an important role, since this material will not melt at high temperatures.

Steel St 40-60 served as the material for the head, and its hardness is 50 HRc.

• The open part of the striker allows you to monitor the quality of the fit of the knot;
• Optimum handle length 700 mm;
• The wooden handle has a polished finish, making the tool pleasant to hold;
• The presence of an anti-corrosion coating on the striker.

• Overpriced - 1300 rubles;
• No limiters;
• No rubber pads.

Conclusion

After reviewing the list of the best sledgehammers for 2022, the buyer can decide on the choice of tool based on their goals and capabilities. However, it should be noted that this rating is not promotional in nature and you should always consult with the seller before buying.