Best 3D Photo Studio Tables in 2022

The design of tables in photo studios for 3D photography is most often used to shoot small objects at different angles from any angle. The range of these products differs among themselves in quality, cost or application.

The best manufacturers of 3D tables are constantly introducing new technologies in order to improve the product and lure the buyer. We will tell about the main leaders in this category and the best tables for 3D photography below.

Types of tables for 3D photography

Each firm stands out in the market with its special technologies or quantitative units. Those. there are manufacturers with a rich selection of tables, and there are those who have 1-2 types of goods in stock, but of very good quality.

Tables for 3D photography, depending on the rotation mechanism, are divided into several types:

• manual scrolling;
• automatic rotation.

Manual scrolling

• Low cost;
• The rotation of the object can be fixed immediately at the desired angle;

• Short service life;
• Takes a lot of time to shoot;
• The photographer gets tired quickly, constantly rotating the table.

Automatic rotation

Easy-to-use version of the table with automatic rotation. He is popular with photographers.

• Variety of product selection;
• Automatic rotation;
• Saving time for shooting;
• Possible adjustment of the mechanism (for example, control panel).

• High price.

Strobolight tables

The company specializes in the production of turntables, photoboxes. The design, functionality and material of the goods differ from each other, and therefore the price fluctuates in different categories: budget, mid-range, expensive. The only similarity of all products is white color. The review includes only two representatives from the company, which, according to consumers, are the most practical.

Mechanical table for 3D photography of the CM series

Purpose: for shooting objects in any studio.

The rotary mechanism on a fixed basis is used for amateur shooting at home and professional in studios. The height of the rotating element makes it easy to move the entire structure from place to place. You can take pictures of objects of any severity within acceptable limits, but at maximum load, the lot is removed quickly.

The mechanism is equipped with a brake that prevents rotation during operation, if you need to capture an object from one angle.

The table markings are special protrusions for the fingers, which provide a good shooting speed, comparable to automation.

Note! The design can be accompanied by a ready-made overlay circle, made of snow-white matte paper with a special plastic coating.

Characteristics

Type of:	mechanical
Model:	standard
Product code:	6351-03
Dimensions (centimeters):	62/60/5
The weight:	7 kg
Possible load:	50-80 kg
Markup:	for 36 sectors
Average price:	5900 rubles

• equipment;
• suitable for any photographer;
• fast, comfortable shooting;
• structural stability;
• price affordability;
• control without much effort.

• not identified.

AC series automatic table

Purpose: for video / photography of small objects.

Model in white color with elements of black inserts, fully automated. On the side there is an on / off button, a connector for connecting the device to the network. There is a switch on the wire that controls the direction of rotation of the platform. This is done manually by pressing the button with a shutter speed of 1-2 seconds and turning it on again.

Characteristics

Model:	AutoTable
Type of:	auto
Product code:	18019-03
Parameters (centimeters):	45 - diameter, 6 - height
Net weight:	3 kg 500 g
Maximum load:	37 kg
Time per turn:	70 seconds
Voltage;	110-220V
Average cost:	8000 rubles

• value for money;
• design;
• functional.

• not identified.

Photocycle tables

Purpose - subject shooting (scanning or photographing). Most often, products are designed for large items, but there are instances for small objects.

Description: Automatic rotary table with constant rotation mode is made of metal, acrylic and plastic. Installation of LED illumination is possible (individual order). This solution helps to get rid of shadows on a white background when shooting.

Characteristics

Name	purpose	Model	vendor code	Table top diameter	Item weight	Personnel per turnover	Price
Table	small items	30 A	NVF-9062	34 cm	30 kg	36; 54; 108	14500 r
Table	large items	120BL	NVF-9063	50 cm	100 kg	38; 76; 152	18000 r
Table	oversized items	200BL	NVF-9064	75 cm	100 kg	50; 100; 200	26000 r

• durable;
• Long service life;
• Choice of frame-by-frame variation;
• Table lighting is possible;
• Products for any items.

• Expensive goods;
• Small selection.

Rekam tables

Rekam works in all areas: from shooting small objects up to large and heavy objects.

The company's products are not limited to the production of tables designed for subjects of a three-dimensional photo shoot, there is also a tripod crane in the arsenal. It allows you to take pictures in 3D-format horizontal and vertical planes.

Products are used not only in the premises of photo studios or video filming, but also for photo shoots on the road.

Table "T" series

The T series table is easy to use for photography in studios and on location, due to its compactness and light weight.

The load bar of the table model allows you to remove small items (for example, a mobile phone, jewelry), as well as large ones: small-sized office equipment, flowers or a computer monitor.

The products of this series differ from each other in the diameter of the disk and the operation of the mechanics, which allows some tables to remove heavy objects. For example, household appliances or a person.

With the help of an automated 3D photography process, you can focus on the artistic side of the resulting images.

Characteristics

• Portable and rotating platform T-12 article FTR-1482. Characteristics: tabletop diameter - 2.7 m; load capacity - up to 12 kg; product weight - 2.5 kg; for one turn - 200 photos. Additions: the presence of removable disks; video mode is supported. The cost of the table: 23900 rubles.
• Platform T-20 article NVF-1070. Dimensions: tabletop surface diameter – 4 m; nominal weight - 4.29 kg; subject weight - up to 20 kg; one rotation - 400 shots. Packing height - 20 cm. Additions: availability of interchangeable countertops; video recording is supported. The cost of the table: 34900 rubles.

• Rotating platform T-50 article NVF-1071. Characteristics: table surface diameter - 5 m; weight of objects - up to 50 kg; gross weight - 2 kg; 400 photos per rotation. Additions: removable disks; video mode. The cost of the table: 44400 rubles.

• Floor table T-150.Technical data: the weight of the object must not exceed 150 kg; circle diameter - 9 m; equipment weight - 24.5 kg. Number of shots per revolution - 400 pcs. Complete set: replaceable disk; video mode support; software; two cables; power adapter. Price: 89000 r.

• Broad purpose of the equipment;
• Possibility of outdoor photography;
• On average, a small table weight.

• High prices for goods;
• Heavy models (T-150), for studios only;
• They occupy a large area of ​​\u200b\u200bthe room (for example, T-150).

Crane for 3D photography

The fully automated crane works in tandem with the T-series rotating platforms.

Purpose: to create 3D images in horizontal and vertical planes.

The uniqueness of the crane: it examines the subject of the photo shoot from all sides, as well as from above. This fact allows you to increase the information content of 3D photography. There are additional camera rotation axes - this is the ability to capture an object from several levels. Speeds up and simplifies the process of work due to the convenient setting of angles with an additional level of shooting.

Product description. The crane consists of 3 main elements: a structural support, a connecting element - a box with a mechanism, an arrow. All parts of the structure are connected with quick-release fasteners. Due to this, the length of the boom is adjusted, the counterweight is balanced and other necessary settings are performed.

Characteristics

Rekam automatic crane.

The frame material of the crane is strong and durable aluminium.

Max reach of the boom is 1.8 m, which allows you to shoot large objects.

Withstands the load of modern cameras (any weight).

Crane cost: 89000 r.

• Automated;
• Shoots an object from any angle;
• Sturdy frame;
• The presence of additional axes of rotation;
• Quick release fasteners;
• Removes any, by size, objects.

• Takes up additional studio space;
• High price;
• Needs additional equipment (table for 3D shooting).

PhotoMechanics tables

The company's arsenal includes a wide range of products, the functionality of which is diverse.

The tables of this manufacturer, with the help of automation, assemble animated videos from a series of frames. The Photo3D Studio program (invented specifically for this product) is responsible for this process.

The table and the camera are controlled by a computer (laptop) via USB.

PhotoMechanics' 3D spherical photography tables create series of up to 360 shots at the required resolution.

The equipment itself is equipped with a wide range of settings and a lot of opportunities for individual consumer orders.

Tables series "RD" and "RDM"

The popularity of the models in this series is caused by the built-in Wi-Fi module. The main advantage of which is the use of the table without unnecessary wires.

Purpose: shooting people, furniture, large-sized objects and household appliances, as well as photographing medium-sized objects.

Reliability of a design is given by a steel frame. The platform itself is made of steel and aluminum, and the top is covered with acrylic.

The average price for models is about 30,000 rubles, but the RD-120 floor table is an exception.

Characteristics

• Table RD-300 article DAN-1095 for large items. Indicators: platform diameter - 3 m; table height - 25 mm; table surface - banner fabric; White color. The material is high quality plywood.Cost: 295000 r.
• Table floor RD-120 article DAN-1094 for overall items. Indicators: platform diameter - 1.2 m; weight of the object in the upright position - 200-250 kg; object size up to 1.1 m; White color. Cost: 127000 r.

• Table RD-60 for medium items. Data: table surface diameter - 0.6 m; White color; the weight of the object in the upright position is up to 40 kg, inverted - 10 kg; dimensions of the object up to 0.7 m; shooting speed 36 shots per 1 min. 15 s. Price: 47000 r.

• Table RD-33 article NVF-802 for small items. Data: tabletop diameter - 0.33 m; White color; the weight of the object in the upright position is up to 20 kg, inverted - 10 kg; shooting speed of equipment, as in the RD-60 model. Price: 35000 r.

• Built-in Wi-Fi;
• Small sizes;
• Lasting;
• Spherical photography.

• The surface of the table is quickly scratched;
• High prices.

Tables of the MFT series

The series is intended for photography of high shoes and mannequins.

The appearance of the model is similar to the tables RD-33 or RD-60, but the range of possibilities is much higher. In the middle price segment, products range from 50,000 rubles.

Characteristics

Table MFT -1 article NVF-7256 with Wi-Fi. Description: table diameter 5–100 cm; weight of the object in any position - up to 50 kg; size of objects - up to 0.8 m; table surface - acrylic; White color. Material - chipboard-melanin. Shooting speed 36 photos per minute. Cost: 63500 r.

Table MFT -1 article NVF-7255 without Wi-Fi with identical characteristics of the model NVF-7256 costs 53200 rubles.

• Fast shooting;
• The item weight limit is independent of position;
• Built-in WiFi.

• Price.

"S" series tables

Model "S" tables are a set consisting of a rotating platform, a metal structure and a white background.

Designed for shooting large objects: motorcycles, furniture or gym equipment.

There are also novelties - studios for online stores. They take large items. The design is equipped with a light module and suspension module. The studios are designed to occupy a small area in the premises. The basic module can be combined with other modules from this company.

The structure has a solid steel frame. And thanks to industrial rollers, it moves easily without resorting to disassembly.

Characteristics

The design of the S-300 Base + Light model DAN-1097 is based on the RD-300 platform with a diameter of 2.6 m. It also includes a metal frame. Lighting - 12 pcs. LED sources. The system is designed to install several cameras that are configured for synchronized shooting. The design is fully automated (rotation and shooting of the object) and is controlled by the Photo3D Studio software (you can use Object2VR Studio). The cost of the kit: 558000 rubles.

There is a cheaper option - non-automated model S-300 Base + Light article DAN-1096. In total for 434000 r.

Studio S-120 Base article NVF-7263. Parameters: occupied area - 2.5 m by 2.5 m; the load on the turntable RD-60 is desirable up to 20 kg. The suspension can be used without a table, then the load on the metal frame is 50 kg. Cost: 298500 r.

Design S-120 Enterprise part number NVF-7264 for large items.Dimensions of objects: width - 1 m; height - 2.5 m; weight up to 200 kg; suspended weight up to 20 kg; unstable objects up to 100 kg. Unstable items are placed on the floor platform and simultaneously attached to the suspension. You can shoot people. The cost of goods: 398000 rubles.

Design S-60ML ref. NVF-7257 for shooting medium subjects in small offices or at home. Base: RD-60 turntable, ML-60 photo machine, special rotating surface background, LED illuminators. Characteristics: occupied area: 1.5 m by 1.5 m; item weight: up to 40 kg; item dimensions: up to 40 cm. Cost of goods: 97,000 rubles.

• The choice between automation and mechanics;
• Reliable design;
• Availability of small products.

• Dimensional design;
• Narrow specialization;
• High price;
• Not for all photo studios.

SX series tables

This series is a ready-made studios, which are equipped with a shadowless dominant suspension. Designed for taking premium series photos. Ideal for shooting complex subjects with reflective surfaces.

The set consists of a rotating table of the MFT series, a metal structure, a white background, a lighting system.

Characteristics

Model SX-60 Base article DAN-1101. Studio size: height - 1.25 m; width - 0.93 m; length - 1.08 m; weight 1.2 kg. Dimensions of the object being filmed: height - 60 cm, width - 40 cm, length - 40 cm. Studio power: 700 watts. Product price: 164500 r.

Model SX-60 MAX ref. DAN-1105 can control table turn and backlight via Wi-Fi. All shown photo studios match the SX-60 Base model. The cost of the studio: 223500 rubles.

The SX-60 model, article DAN-1104, with a Holder for a camera and features similar to the SX-60 MAX, costs 194,000 rubles.

The SX-60 model, article DAN-1103, has the same characteristics as the SX-60 MAX, but it comes with a cabinet. Cabinet size: height - 1 m, width - 0.8 m, length - 0.95 m. Price 208500 rubles.

• Shadowless illumination;
• Light weight;
• Occupies a small area of ​​the studio;
• Large selection of models;
• Each photo studio has its own characteristics.

• High price;
• Limited characteristics of the removed items.

ST Series Photo Studios

The exterior of the studios. Rectangular platforms, to which the backs are attached, resemble huge chairs.

Purpose. Used for 3D shooting of medium-sized objects.

The prefabricated frame of the studios is easy to unfold and takes up little space. The construction material is made of steel and equipped with industrial rollers with lock.

The tabletop is covered with matte white acrylic and is easily replaced.

Lamps are provided in the amount of 12 pcs.

Characteristics

Model ST-100ML article NVF-7259. Description of the sizes: the occupied area of ​​studio – 2 sq.m. m.; object width - up to 70 cm; height - up to 1.4 m; weight - up to 40 kg; table top 1 m. Complete set: table MFT-1; studio module ST-100; software package; lighting module. Production cost: 158000 r.

Model ST-100MLK NVF-7260 using tripod crane. Size of objects: width - 70 cm; length - 70 cm; height up to 1.4 m; weight up to 40 kg. Dimensions for 3D photography: width - 0.7 m; length - 0.7 m; height - 0.9 m. Complete set: K-150 crane-support and other equipment, as for the ST-100ML model. Production cost: 259000 r.

• Durable material;
• Takes up little space;
• The matte finish does not give glare when shooting;
• The presence of rollers that increase mobility;
• The tabletop is changing;
• Additional devices (for example, a crane);
• Easily imported;
• Assembly frame.

• Cost of goods;
• Small selection.

Cranes from PhotoMechanics

Representatives of this series are tripod cranes for rotary tables.

The "K" series is not rich in equipment. This includes two types of cranes: K-100 and K-150.

One is intended for 3D shooting of large-sized objects (furniture, large household appliances), and the other is for medium-sized ones (laptops, shoes, small electronics, etc.). However, with the right settings, the K-150 is capable of capturing small objects.

Models also differ in price. The universal version of the tripod crane will cost more.

Characteristics of the K-100 model

The automatic crane is intended for rotary tables of the RD-33 and RD-360 models. He picks up small things. Supports manual control. Thanks to the connection with turntables, spherical photography can be carried out.

Pictures of objects of the required resolution can be created in two planes.

The crane has a wide range of possibilities and settings for individual requests.

Product price: 83000 r.

• Choice in management;
• Spherical shooting;
• Rugged construction;
• Creation of pictures in two planes;
• Cheaper than the K-150 model.

• Small selection for revolving tables;
• Narrow specialization.

Characteristics of the K-150 model

This crane is considered universal, as it is suitable for shooting any objects due to flexible settings. First of all, its purpose is large-sized items.

Compatible with RD-120, RD-120W, RD-60, RD-60W and RD-33 rotary table models.

The crane rotates 360 degrees horizontally and 180 degrees vertically.

The crane is controlled via USB.

• Suitable for any shooting;
• Large selection of tables for collaboration;
• Reliable;
• Automated;
• Wide application.

• Expensive in price.

Conclusion

The considered models are popular in the photo and video industry. This is only a small part of the rotary tables and cranes for them on the market.

The criteria for choosing tables depends on the consumer's request: price, purpose, size of goods. How to choose the right table for 3D photography in a studio? The answer to the question is obvious: take into account the size of the room, when choosing equipment, and compare it with the products.

Since there are many manufacturers of such tables on the market, the question arises: “which company is better to buy?”. Focus on the characteristics of the product.

Mechanical versions are popular among budding photographers due to their affordability and huge selection. Fotokvant provides this opportunity to any interested buyer.

Automated table rotation is an advanced way of mechanical work that speeds up 3D imaging. The transition to such products is a new level for photo studios.

More convenient goods are ready-made photo studios, which have their own characteristics in purpose. Which one is better to buy? The universal option is suitable for any studio and will not disappoint the photographer. The leading provider of such solutions is PhotoMechanics.

How much does this manufacturer's product cost? The answer to this question cannot be answered unambiguously.Prices can fluctuate by a huge margin. Therefore, first you need to decide on a series of goods, and then look for options for acquiring it.

Where is it profitable to buy equipment for a three-dimensional photo shoot or video recording? The easiest way to buy in the store: a guarantee is given, a return is possible; inspection of the goods for defects on the spot; installment is possible.

An online store is also a good option, but not reliable. There are goods that are made only to order and the waiting time is up to 60 days. You will also have to pay for shipping.