Over time and the operation of the car, the gearbox begins to make extraneous noise, rattle, and so on. This occurs due to increased clearances between parts or bearing play. An additive will help improve the condition and maintain the performance of the car in this situation.
Content
An additive is an automotive chemical that is added to fuel in a small amount to restore the performance of car parts.
The popularity of this autochemistry is due to the fact that with its help you can get rid of most of the problems without resorting to physical disassembly of the vehicle.
In order to determine which additive is needed in your case, it should be borne in mind that they are divided into a large number of types for their intended purpose:
For the greatest effectiveness, additives should be added to the oil when it is still in the canister. If the oil has already been changed, then you can pour the additive directly into the mechanism through the filling hole. Pouring an additive into old oil has the risk of not only not improving transmission performance, but, on the contrary, worsening it. Since the old oil loses its absorbency and cannot dissolve the additive components. If the oil has already been changed, then you can pour the additive directly into the mechanism through the filling hole. Important! The oil must be well warmed up.
Also, before buying an additive, always read for what purposes this composition is used, with which oil it is compatible and other characteristics. In rare cases, the additive can turn the oil into a jelly-like mass.
If you have a desire to buy additives, then this can be done in specialized stores.The advantage of this method is that you can consult with the seller and determine as correctly as possible which additive you need. There is also an option to order an additive in the online store. Also quite a good way with its pluses. For example, you do not need to go anywhere, and prices on the Internet are often less than in stores. You can also order a parcel by courier and it will be brought to your door.
Price — 2 200 rubles.
This tool has excellent penetrating power, thanks to which it can get into the smallest cracks in the metal and clean it from salt and moisture. For greater efficiency, it contains elements such as a corrosion inhibitor, etc. They create a dense protective film and isolate the metal from air and moisture.
Price - 2400 rubles.
A unique composition with high anti-corrosion properties. It is based on wax in the form of a gel, which takes the form of cracks and well displaces moisture from hard-to-reach places. After application, a brown film is formed. It protects against moisture ingress and blocks the spread of corrosion.
When working with this agent, the coating must be cleaned, and its temperature should not be lower than 15-25°C.
Price - 2000 rubles.
The agent is a mixture of bitumen, synthetic resins, solvents and inhibitors. After its evaporation, an elastic film remains, which protects the parts from environmental influences and corrosion. It has good anti-corrosion protective properties. The product is thixotropic and can therefore be applied without dripping. This allows you to apply thicker layers in one working pass. It is not recommended to spray on moving parts.
Price - 400 rubles.
Powerful protection against any aggressive effects of moisture and salt on the metal. The reinforced formula prevents and stops the corrosion process by 100%. Recommended for the conservation of equipment in the off-season. The product is harmless to metals, plastics, rubber and paint surfaces. It will reliably protect and prevent metal from oxidizing for at least 1 year.
Price - 380 rubles.
This reinforced sealant is made in the USA. Sold in bottles of 325 g. It helps to quickly close all the cracks without resorting to soldering. You need to apply the product only according to the instructions, intuitive actions can lead to breakdown of the cooling system.
Price - 1120 rubles.
The sealant well closes all the cracks in the places of soldering, as well as the porosity of the metal. He also copes with cracks without problems. It can be used without fear that the product will enter the combustion chamber. Does not conflict with known antifreezes, cooling and heating systems.
Price - 230 rubles.
This tool is designed to eliminate leaks through rubber parts, seals, seals. Increases the elasticity of the seals and causes them to swell, which compensates for their wear. Also, this additive can be used for preventive purposes. It is added to the gearbox, final drive housing and transfer case.
One bottle contains 250 ml of the product.
Price - 1450 rubles.
This composition helps to quickly cope with a crunch or noise when shifting gears, and also reduces consumption by restoring the course of bearings and gears. The composition from Suprotec does not change the characteristics of the oil, but only affects the surface of the metal. Excellent for transmission additives in jeeps and passenger cars.
Price - 1175 rubles.
Revitalizant from a Ukrainian company, well protects all moving parts from wear. Forms a protective film on them. Due to the increased concentration (by 20%) of the active substance, it has a large margin for the restoration of worn parts.
This additive, due to its composition, improves the characteristics of the gearbox, and also favorably affects the properties of the gear oil, increasing its service life up to 5 times. Nanoparticles fill all worn parts of the box: bearings, synchronizers, gears, etc. These particles have a polymer shell, so it does not react with transmission fluid.
Price - 2200 rubles.
Xado 1 Stage Transmission is a product of the 3rd generation of revitalizants from XADO. The additive, due to its unique composition, can restore the geometry of spare parts, and also forms a ceramic-metal coating on the surface of gear teeth and bearings, which increases the life of parts many times over. Also, the gel restores surfaces from friction and ultimately reduces it.
Price - 800 rubles.
The additive is suitable for cars with high mileage and a worn gearbox. It contains molybdenum disulfide, which restores damaged parts. Owners of vehicles with more than 200,000 kilometers of mileage confirm the improvement in the overall condition of the transmission. The manufacturer claims that for the full effect, you need to fill in the additive at a ratio of 1 tube per liter of ATP, so about 4 tubes will be needed for most mechanical boxes.
Price - 440 rubles.
The tool increases the resource characteristics of manual transmissions, transfer cases, axles. Reduces the wear rate of highly loaded pairs of gearing of all types many times over. Provides reliable protection against wear of gearbox parts.The composition is most effective for the transmission of off-road vehicles, trucks and sports cars.
Price - 2600 rubles.
Anti-friction and protective additive Cera Tec based on a molybdenum compound with the addition of a ceramic component. The effect of a single application of the additive lasts up to 50,000 km. Significantly reduces friction and wear of moving parts due to ceramic microparticles. It also resists extreme high and low temperatures and extends transmission life.
Price - 674 rubles.
Means for preventive flushing of manual transmission and transmission. The additive will easily clean any contamination in the gearbox. Cleaning is done when changing the oil. Prevention of transmission and manual transmission provides a longer service life, less chance of failure of these systems. The additive does not affect metals, rubber and oil seals.
Price - 1329 rubles
This cleaning additive can be used for both engine and manual transmission. The product completely removes any type of contaminants, also removes insoluble elements and wear products. However, cleaning with this tool is best done in professional service stations.
Price - 940 rubles.
This tool, like the previous one, is suitable for manual transmission and engine. The composition of the additive includes the most effective substances that can dissolve most of the contaminants. At the same time, it does not clog the oil receiver at all. Also, the tool can help with coking of valves in the oil system.
The use of additives favorably affects the operation of the car, and also increases its service life and delays expensive repairs. Most importantly, with their help, you can solve a large number of problems and save time.