The 8 Best Foam Guns in 2022

In repairs, mounting foam is very popular, and all due to the fact that it makes it possible to quickly fill the cavities of the space during the installation of windows or between any building materials. Polyurethane foam, by its properties, is an instantly hardening, airtight substance.

It perfectly prevents the appearance of cracks and is suitable for fixing elements in construction. She has only one drawback, after opening the cylinder and starting to use it, the foam treacherously freezes in the valve, thereby creating problems in the further use of the product. It turns out that the purchased cylinder must be used completely, without residue. The way out is to buy a special gun designed for mounting foam.

Modern cylinders have a threaded base that is easily screwed onto the gun. The tool perfectly doses the foam supply, the seams are aesthetic and without excess funds. Once you've tried a pistol, you won't want to give it up.

How to choose

As a rule, the use of mounting foam from a cylinder will cost more money (even with infrequent use) and will be significantly inferior in quality to work performed with a gun. The tool is not so expensive and quickly pays for itself, the main thing is to make a good purchase so that later you do not have to regret the money spent. And for this it is worth studying the selection criteria.

The main selection criterion is the reliability of the device. All parts of the tool should preferably be made of metal, but it has its drawbacks, and the main one is heaviness, but it will last relatively longer than a product made of plastic or a powder mold. It would be better if the device can be disassembled, as this will facilitate the process of cleaning or repair. In addition, if any part breaks, it can be replaced with a new one without any problems. You will also need to pay attention to the quality of the two valves.

The next points to focus on are the length of the barrel and the flow regulator.

The length of the barrel is in three ranges: from 10 to 15 cm (suitable for working on accessible surfaces), from 15 to 20 cm (universal length, suitable for any work) and more than 20 cm (the tool is suitable for working on hard-to-reach surfaces).

Regarding the flow regulator, if the gun is without it, then it will not allow you to save mounting foam. For the price, such a model, of course, is cheaper than its "brothers". There are pistols that have a plastic regulator in their functionality, but it is extremely unreliable, since continuous operation easily disables it. The best tools are those that have a Teflon or metal ball.

Top Producers

Dozens of different companies produce repair and construction tools. Among them, leaders from European brands stand out: Kraftool, Matrix, Stayer, Atoll and Hilti.

The German Kraftool creates a variety of series of pistols for every taste and budget. For example, the Kraft-Max series is known for having a Teflon-coated working surface, while the Industrie series has a brass needle valve and a metal barrel with a body.

Matrix has long gained popularity in our market and became famous for its impeccable quality. All the necessary tests are carried out perfectly and there is no doubt about the reliability of the purchased products.

How to use

Before the work process, you need to carefully check the tightness of the threaded connections. Shake the foam bottle thoroughly, then remove the cap and screw the gun to the bottle. On the edge of the gun, where the handle is located, there is an adjusting screw, it will need to be turned to the left a quarter of a turn. Now you can press the trigger, the gun will begin to fill with foam. Adjustment (exit) of the foam is carried out using a screw. It is not necessary to fill the entire seam with foam, as it has the ability to expand. Therefore, the filling should be 40 percent of the estimated volume of the seam.

After the work is completed, the adjusting screw is tightened to the stop. If there is still foam in the balloon, then you do not need to unscrew it. The foam in the gun must be under pressure, otherwise it will begin to dry. But you need to remember that for more than 3-4 days the gun should not be filled with foam, as it will thicken.

Rating of the best guns for polyurethane foam

KRAFTOOL PANTER 06855

For any repair, whether at home, in the country or at work, you will need to use mounting foam. It ideally fills the voids, and if there is a pistol along with the cylinder, then the upcoming work will only be a joy. Model KRAFTOOL PANTER 06855 has an ergonomic handle and is very comfortable to use.

The body of the product is Teflon coated, and the length is such that no extension cord will be needed. There is an adjustment screw, but with a miniature head, which makes adjustment not very convenient. In order for the tool to last as long as possible, it should be fully looked after, that is, do not forget to rinse it after work with a special agent and store it in a dry place. The weight of the product is 600 grams, the dimensions of the packed goods are 380 x 180 x 60 mm.

You can buy at a price of 1200 rubles.

• Teflon coated;
• Fairly light;
• Convenient to operate;
• Simply cleaned on the outside;
• Has an ergonomic handle.

• Weak valve.

STAYER PROFI 06862

Of the inexpensive models, the STAYER PROFI 06862 model has good functionality, it is one of the few that comes with a nozzle that allows you to fill cavities in hard-to-reach places. The trigger has additional elements of effort, which protects it from falls from a small height.A small price allows you to condescendingly look at such a drawback as a thin handle with a partition. But if you work with gloves, then you won't rub your fingers.

The product has a sealed design and Teflon coating. The production of the pistol is Chinese, and you need to be prepared that the resource can be enough for 3-4 jobs. This is an amateur instrument and for its price such quality is excusable.

You can buy for 600 rubles.

• Cheap;
• The kit comes with a nozzle;
• Lightweight and easy to use.

• Can be attributed to disposable tools.

Matrix 88669

The Matrix 88669 model will appeal to both amateur and professional use in repair and finishing work. The pistol has a fairly long rod, which makes it possible to function in hard-to-reach places. The body of the product is made of metal and covered with a two-layer Teflon coating, which is an excellent barrier to foam sticking.

After use, you need to very carefully wipe the device from the outside and clean the spout with a special nozzle. The main thing is a careful attitude, Teflon is easily scratched and, if negligent, quickly become depressing. The handle of the device is equipped with two stops to protect fingers from pinching.

The cost of the pistol is about 1300 rubles.

• Decent build quality;
• Pleasantly lies in the hand;
• Comfortable handle;
• Threaded adjusting screw fine pitch;
• Easy to clean.

• If you are careless, the coating is scratched;
• Often fake.

FIT 14272

Of the budget models, the FIT 14272 pistol is popular.It is often used in various construction or installation work, when it is necessary to fill cavities and holes in various materials. Although the model is not professional, but the lightweight zinc alloy body makes it reliable and in demand among buyers.

The tool is comfortable in the hand, the smooth trigger makes it possible to accurately dispense the foam. But, nevertheless, there may be complaints about the trigger, since it is far away and you have to reach for it with your fingers. The weight of the product does not reach 400 grams. Of the amateur models, the FIT 14272 is considered one of the best in its segment.

You can buy for 650 rubles.

• Affordable cost;
• Light;
• Well sits in the hand.

• If the fingers are short, it will be uncomfortable to reach for the trigger;
• The handle is made of plastic, so you need to protect it from bumps.

SibrTech 88671

The body of the SibrTech 88671 model is made of aluminum alloy, in addition, the frame is reinforced, so if a fall occurs from a small height, the parts of the gun do not fall off. The weight of the product is about half a kilo. The tool is equipped with a large adjustment knob with a ribbed plastic tip. The gun handle is very comfortable and thanks to it it is easy to control the flow of foam. The main advantage of SibrTech 88671 is excellent ergonomics, it makes using the tool comfortable and does not allow hands to get tired.

How much can you buy such a successful model? The price is low, only about 800 rubles.

• Ergonomics on the highest class;
• The valve is sealed and easy to clean;
• Good combination of price and quality.

• The mounting of the balloon leaves much to be desired.

Foam gun Zolder Teflon

Professional models include a model for Zolder Teflon polyurethane foam. The tool is designed to accurately dispense professional polyurethane foam. The device is equipped with a foam supply volume regulator. The weight is light, only 350 grams, so you can work comfortably and tirelessly. The coating of the product is Teflon, which is the difference between ZOLDER products.

You can buy for 1800 rubles.

• Professional;
• There is a regulator of volume of giving of foam;
• Light;
• Teflon coated.

• Expensive.

Encore 56358

The Enkor 56358 foam tool has excellent functionality. This gun makes it possible to work in hard-to-reach places, and all thanks to the presence of a thin and long rod. The package includes a gun, 2 nozzles, a scraper for cleaning the adapter, 2 extensions and a manual for the device. Power supply is mechanical, the coating of the product is Teflon. There is a needle valve. Weight about 400 grams. Dimensions 340 x 120 x 50 mm.

You can buy for 780 rubles.

• Good build quality;
• Decent functionality for a low price;
• Sealed;
• There are comfortable nozzles;
• Cleans up without problems.

• Fuzzy adjustment of the locking needle.

Fomeron Top 590007

The Fomeron Top 590007 model has a Teflon coating, the body is made of zinc alloy, the handle is plastic, there is a needle valve. Food at Fomeron Top 590007 is mechanical. Packed weight 470 grams. The muzzle is collapsible, so the product is easily cleaned of foam. The sealing system has been improved, thanks to the fact that there are two rubber gaskets that perfectly protect against air. The tool is adapted to work at low temperatures.

You can buy for 1300 rubles.

• Balanced ergonomics;
• Muzzle collapsible;
• Convenient controller.

• When used, the valve may be poisoned.

Conclusion

The foam gun will last a long time, if you do not forget to follow the basic recommendations for use.

Minus temperature is rarely suitable for which tool, it is advisable to work when the air is from +5 C to +30 C. Before you start work, you should look into the instructions, there will be recommendations on how to put on and securely fix the cylinder. The foam can should be whipped for about 30-40 seconds and kept upside down. When filling the seams, use the tool from top to bottom or from left to right.

When the work is completed and the container is completely empty, it is removed, but if there are remains of foam in it, it can be left on the tool, but not more than six months. And do not forget to properly ventilate the room in which you work with foam, after all, it contains harmful substances for human health.